Water bath sample concentrator Laboratory sample solution rapid concentration 12 hole extractor Air dryer

Description :

　　Sample concentrator, water bath sample concentrator, extractor, dry nitrogen blower, water bath nitrogen blower

　　1、 Product Introduction

　　The water bath sample concentrator adopts blowing and trapping technology, and can also control the temperature and heat of the sample to achieve rapid concentration of the sample solution. This method has the characteristics of time-saving, convenience, and accuracy. Widely used in fields such as food safety, medicine, pesticide residue detection, clinical pharmacokinetics, etc.

　　Its application areas:

　　1. Pesticide analysis: vegetables, fruits, grains, plant tissues, etc

　　2. Pharmaceutical drug testing: Traditional Chinese medicine pharmaceuticals and drug testing

　　3. Environmental analysis: drinking water, groundwater, polluted water, etc

　　4. Bioanalysis: Serum, plasma, blood, urine

　　5. Product inspection: Testing for dioxins, Croats, etc

　　6. Food and beverages: milk, alcohol, liquid beverages

　　2、 Product parameters

　　1. Product name: Water bath sample concentrator

　　2. Number of samples processed: 12

　　3. Heating method: water bath heating

　　4. Temperature control range: room temperature -100 ℃

　　5. Temperature control accuracy: ± 0.5 ℃

　　6. Temperature control method: digital display/PID adjustment

　　7. Air source: Comes with built-in air source

　　8. Gas flow rate: 0-50L/min

　　9. Standard number of heating blocks: one test tube rack

　　10. Heating power: 300W

　　11. Power supply: 220V 50Hz

　　3、 Usage method

　　Before use, add an appropriate amount of water to the sink according to the experimental requirements, then place the experimental vessel on the shelf and cover the hole cover.

　　2. Connect the external power supply and place the power switch on the "ON" end.

　　3. Set temperature: Press the SET button to set or view the temperature set point. Press the SET key and the digital display character will start flashing, indicating that the instrument has entered the set state. Press the △ key to increase the set value, press the ▽ key to decrease the set value. Long press the △ key or ▽ key to quickly change the data. Press the SET key again to return the instrument to normal working state and complete the temperature setting. If the temperature controller is intelligent, a separate temperature control manual will be attached. When the set temperature value exceeds the water temperature, the heating indicator light will turn on, indicating that the heater has started working. At this time, the digital display will show the actual water temperature. When the water temperature reaches your desired level, the constant temperature indicator light will turn on and the heating indicator light will turn off. At this point, the heater stops working. After heating and constant temperature conversion, the water temperature can only remain constant for a certain period of time.

AfterSalesService :

• Water bath sample concentrator