Online water ozone monitor screen dot matrix LCD display for real-time continuous monitoring of ozone concentration in water
Category:
Environmental Protection/Analytical instruments/Water quality online monitoring system
Model:
SZ-O3
Brand:
Jingcheng Instrument
model:
SZ-O3
Working Voltage:
220VAC±10%
measurement accuracy:
Better than ± 1% or ± 0.01 mg/L, ± 0.5 ℃
structural style :
wall-mounted
Temperature control range:
Manual/automatic temperature compensation function (0-60 ℃)
Product Type:
Online instruments
Processing & Customization:
No
weight:
zero point nine
Scope of Application:
Ozone: 0-20.00 mg/L (ppm), Temperature: 0-60 ℃
Place of Origin:
Qingdao
manufacturer:
Qingdao Jingcheng
Retail Price
5,500.00USD
重量
kg
- Product Description
-
model SZ-O3
Working Voltage 220VAC±10%
measurement accuracy Better than ± 1% or ± 0.01 mg/L, ± 0.5 ℃
structural style wall-mounted
Temperature control range Manual/automatic temperature compensation function (0-60 ℃)
Product Type Online instruments
Processing & Customization No
weight zero point nine
Scope of Application Ozone: 0-20.00 mg/L (ppm), Temperature: 0-60 ℃
Place of Origin Qingdao
manufacturer Qingdao Jingcheng
Description :
Online water ozone monitoring device
Environmental networking
1. Application of Online Ozone Monitoring Instrument in Water
Used for continuous monitoring and control of ozone content in aqueous solutions in drinking water treatment plants, canning plants, beverage plants, drinking water, swimming pools, cooling circulating water, etc.
Main Features
Adopting a non membrane constant voltage sensor, there is no need to replace the membrane or medication. It has high sensitivity, rapid signal response, accurate measurement, stable performance, zero position stability, and simple maintenance.
◇ Large screen dot matrix LCD display, Chinese menu operation.
Simultaneous display of multiple parameters: ozone value, temperature, output current, etc. are displayed simultaneously, which is intuitive and easy to read, and there is a range overrun prompt.
◇ It has the function of restoring factory settings and slope correction.
◇ Manual/automatic temperature compensation function.
Communication function (optional): Equipped with RS-485 communication interface (partially compatible with MODBUS protocol), the ozone value corresponding to 4-20 mA current output can be set arbitrarily.
◇ Optoelectronic isolation with 4-20mA current output.
◇ The function of setting the hysteresis value arbitrarily avoids frequent actions of the switch relay, and has the function of setting the switch value to turn off and off.
Watchdog function: Ensure that the instrument panel does not crash.
◇ Power failure protection>10 years.
◇ PID pulse control output (optional).
◇ ABS plastic shell, waterproof, dustproof and moisture-proof design.
24-hour monitoring
2. Technical indicators of online water ozone monitoring instrument
Measurement range: Ozone: 0-20.00 mg/L (ppm), Temperature: 0-60 ℃
Resolution: 0.01mg/L, 0.1 ℃
Accuracy: better than ± 1% or ± 0.01 mg/L, ± 0.5 ℃
◇ Manual/automatic temperature compensation function (0-60 ℃).
Control interface: Two sets of ON/OFF relay contacts, divided into high point and low point alarm signal photoelectric isolation outputs.
◇ Signal isolation output: Optocoupler isolation protection 4-20mA signal output.
◇ Relay: The hysteresis of the relay can be set arbitrarily, and the relay load is 3A 220VAC/24VDC.
◇ Working conditions: The ambient temperature is between 0-60 ℃, and the relative humidity is ≤ 90%
◇ Output load: Load ＜ 750 Ω (4-20mA)
◇ Working voltage: 220VAC ± 10%, 50/60Hz
◇ Size: 96 × 96 × 156 mm
◇ Hole size: 91 × 91mm
Weight: 0.9Kg
Protection level: IP65, waterproof, dustproof, moisture-proof
Ordering guide: 1. Optional imported probe and Italian SZ283 electrode probe can be used interchangeably.
2. Flow installation
3. Customizable English instruments
Water Quality Tester
Ozone analyzer
AfterSalesService :
Key words:- Online water ozone monitoring device
More Products
