Integrated atmospheric sampler with built-in lithium battery
Category:
Instrumentation/Environmental testing instruments/Atmospheric sampler
Model:
LB-2030
Brand:
Qingdao Road Expo
brand:
Qingdao Road Expo
model:
LB-2030
type:
Dual channel atmospheric sampler
flow range:
60～140L/min
Continuous working hours:
eight
Operating Temperature:
See details
power supply:
AC 220V (± 10%), 50Hz or built-in lithium battery
Processing & Customization:
yes
Overall dimensions:
256 × 270 × 200mm (length × width × height)
weight:
About 5
Place of Origin:
Qingdao
manufacturer:
Qingdao Road Expo
Retail Price
8,900.00USD
重量
kg
- Product Description
-
brand Qingdao Road Expo
model LB-2030
type Dual channel atmospheric sampler
flow range 60～140L/min
Continuous working hours eight
Operating Temperature See details
power supply AC 220V (± 10%), 50Hz or built-in lithium battery
Processing & Customization yes
Overall dimensions 256 × 270 × 200mm (length × width × height)
weight About 5
Place of Origin Qingdao
manufacturer Qingdao Road Expo
Description :
Manufacturer contact person: Fu Yajian, Qingdao Lubo manufacturer specializes in environmental testing instruments. With over ten years of experience and excellent technology, Qingdao Lubo is worthy of your trust
LB-2030 Integrated Atmospheric Sampler (with built-in lithium battery)
Product Introduction
This instrument uses the filter membrane weighing method to capture total suspended particulate matter (TSP), inhalable particulate matter (PM10), or fine particulate matter (PM2.5) in the ambient air. Collect various gaseous substances in the ambient atmosphere and indoor air using solution absorption method; It can be widely used in environmental monitoring, health and epidemic prevention, labor protection, scientific research institutions and other fields for sample collection of gaseous substances and particulate matter.
execution standard
JJG 956-2013 Atmospheric Sampler
JJG 943-2011 "Total Suspended Particle Sampler"
HJ/T 374-2007 Technical Requirements and Testing Methods for Total Suspended Particle Samplers
HJ/T 375-2007 "Technical Requirements and Testing Methods for Environmental Air Samplers"
HJ/T 93-2013 "Technical Requirements and Detection Methods for PM10 and PM2.5 Samplers in Environmental Air"
HJ 618-2013 "Determination of PM10 and PM2.5 in ambient air by gravimetric method"
Technical Specifications
Main parameters
parameter range
resolution
accuracy
Dust sampling flow rate
（60～140）L/min ， Working point flow rate of 100 L/min
0.1L/min
≤±2%
Atmospheric sampling flow rate
(0.1-1.0) L/min (expandable)
0.1L/min
≤±2%
sampling time
Set freely within 0-99H59 minutes
1min
20min ≤±1s
Pre measurement temperature
（-55～125）℃
0.1℃
≤±2.0℃
Pre measurement pressure
（-20～0）kPa
0.01kPa
≤±2.5%
atmospheric pressure
（60～130）kPa
0.01kPa
≤±500Pa
Traffic repeatability
≤ 2%
Traffic stability
≤ 5%
load capacity
At a flow rate of 100L/min, it can overcome a resistance of 9kPa
piece
grain
thing
pick
sample
head
Cut
cut
special
conscript
TSP sampling head
Da50=(100±1)μm δg =1.5 ±0.1
PM10 sampling head
Da50=(10±0.5)μm δg =1.5±0.1
PM2.5 sampling head
Da50=(2.5±0.2)μm δg =1.2±0.1
Entrance speed
0.3 m/s
Effective filter membrane diameter
Φ80mm
connector
M27×1.5
Allowable deviation of air inlet width
≤±2.0%
Overall dimensions
256 × 270 × 200mm (length × width × height)
Sampler noise
≤62dB(A)
working power supply
AC 220V (± 10%), 50Hz or built-in lithium battery
AfterSalesService :
Key words:- Integrated atmospheric sampler
More Products
