Shandong Qingdao nucleic acid sampling workstation manufacturer

　　Shell size (external)

　　2100mm*1400mm*2800mm

　　Shell size (internal)

　　2000mm*1300mm*2000mm

　　Shell material

　　insulation board

　　Observation window material

　　Acrylic (organic glass)

　　Sterilization system

　　UV lamp sterilization time: 30 minutes to 60 minutes is suitable

　　air supply system

　　FLJ power frequency centrifugal blower

　　filter element

　　Primary filtration: dustproof sponge pad gaoji filtration: H14 filter

　　monitor

　　Internal pressure display (positive pressure 0-30PA), internal temperature display

　　insulator system

　　The material of the warehouse body is selected as insulation board

　　intercom system

　　Two way window intercom system

　　lighting system

　　LED lighting lamp

　　Split air conditioning system (1 horsepower)

　　4workflow

　　1. When sampling, turn on the fan to operate the positive pressure system in the isolation compartment, and adjust the temperature inside the compartment through the air conditioning thermostat;

　　1. The inspected personnel shall deliver the instrument to the sampling personnel's sleeve according to the instructions;

　　2. The in cabin sampling personnel use glove operated ports to collect throat swabs from the tested personnel, and after sampling, place the swab swab cotton swab into the sampling tube;

　　3. The personnel in charge of sample registration and sorting in the cabin shall wipe the surface of the sampling tube passed in by the tested personnel, label and register it, and then put it into the biological sample transfer box;

　　4. After the sample storage in the biological sample transfer box reaches a certain amount, the personnel in charge of sample registration and sorting inside the container transfer the samples to the personnel in charge of sample transfer outside the container;

　　5. After the sampling is completed and personnel are evacuated, turn on the ultraviolet lamp and sterilize and disinfect the isolation chamber.

Attention：

　　1. When using the instrument, try to avoid direct sunlight and avoid using it on rainy days to prevent the normal operation of the instrument from being affected.

　　2. The normal operating environment temperature of the instrument is -5~30 ℃. If the temperature is too high or too low, it will affect the normal use of the instrument.

　　After use, please flip the gloves inside the compartment to extend their lifespan.

　　4. The designed service life of medical gloves in outdoor environments is one month, and the specific time may vary depending on the frequency of glove use and the working environment.