Guangdong GRC manufacturer decoration grade GRC Roman column installation operation knowledge guide

Description :

　　Shangpin Guangdong GRC Customization Manufacturer has always adhered to the concept of "no low quality" to operate its brand. For the past 20 years, it has continuously innovated the research and development technology of GRC customization base materials and improved the product quality of GRC customization. Shangpin Guangdong GRC Customization Manufacturer refuses inferior products and never sacrifices product quality for competition. From beginning to end, it is the cost-effective choice for GRC customization by decoration units. Shangpin Guangdong GRC Customization Manufacturer welcomes customers in need to call us for project negotiations.

　　GRC components such as Roman columns are increasingly widely used in architectural decoration and have gradually gained popularity due to their high decorative and artistic value. What we usually see are already installed Roman columns, so how are GRC Roman columns installed? Let's talk about this issue.

　　GRC Roman columns are all made from GRC component molds. Below are the installation steps for various types of Roman columns.

　　GRC Roman Column Installation Node

　　This GRC Roman column is composed of two halves with pre embedded welding points at its edges.

　　1. Firstly, fasten the two halves of the column foundation to the bottom of the column, and weld the welding points at the joint firmly to make it a whole;

　　2. Correct the position so that the column is centered;

　　3. Fill the gap between the column foundation and the inner column with cement mortar;

　　4. The same method is used to sequentially install the column body upwards, watering each section until the column head is reached.

　　Non load bearing hollow GRC Roman column installation node

　　1. Firstly, it is necessary to embed welding points at the top and bottom of the brick or concrete at the installation position of the column.

　　2. Weld angle steel according to the inner diameter of the GRC Roman column to form a tripod as the inner keel. Weld the lower part firmly to the underground embedded parts, leaving room on the upper part. The tripod can be connected upwards as it is installed.

　　3. Insert the column foundation and body onto the keel, correct the groove position, and then connect the welding points buried on the column foundation and body to the keel with steel bars. Install the grooves vertically section by section until one section of the column body is reached.

　　4. The column head is composed of two halves. The triangular keel is directly welded to the embedded part on top, and then the head and half column head are combined first, and the welding point at the joint is welded.

　　5. Use cement to level and smooth the joints.

　　Installation method of load-bearing GRC Roman column

　　Similar to the installation method of non load bearing GRC Roman columns, only concrete can be poured into the upper opening after installation. The difference is that load bearing GRC Roman columns need to be installed first and then topped, otherwise concrete cannot be poured in. Non load bearing GRC Roman columns can be decorated with a building first and then installed with GRC Roman columns.

　　The installation of GRC component Roman columns is actually not complicated, so pay more attention to the details during installation to avoid errors.

　　GRC Roman columns have a strong artistic atmosphere and majestic appearance. Using them to decorate buildings highlights their beauty, and also contains the cultural and artistic atmosphere of the building, as well as an elegant and noble style. Mastering the installation method of Roman columns is of great benefit.

AfterSalesService :

• Guangdong GRC manufacturer