Steel frame lightweight roof panel Shenbo 09CG12 steel frame lightweight panel GWB6015
Category:
building materials/Waterproof and fireproof functional materials/insulation material
Model:
Custom Drawing
Brand:
Shen Bo
model:
Custom Drawing
material:
Cement foaming
Soft and hard conditions:
hard
Retail Price
160.00USD
重量
kg
- Product Description
-
model Custom Drawing
material Cement foaming
Soft and hard conditions hard
Description :
Steel frame lightweight roof panel wholesale quotation from Shenbo for steel frame lightweight panel
(1) Transport the board to the floor using an elevator, and then manually transport it to the working floor for installation in sequence.
(2) When installing the floor slab, the length of the slab placed on the support shall not be less than 40mm. After being in place, the main ribs of the floor slab should be firmly welded to the support (embedded parts on the concrete beam); The overlapping length and gap at both ends of the board should be uniform. If there are gaps at the support, iron sheets should be used to plug them, and then welding should be used to fix them
(1) The steel skeleton is connected by welding, and the quality grade of the weld seam during welding is. Each board shall be welded at least three points to the support (embedded part) on the steel frame (at least two points at the end). When installing the sandwich floor slab, the length of the board placed on the support shall not be less than 40mm. After the floor slab is in place, the main rib of the floor slab shall be welded firmly to the support (embedded part on the concrete beam), and the length of the weld seam shall not be less than 40mm.
(2) Unauthorized openings are not allowed on mezzanine floor slabs. When the size of the opening is d>; When it is 200mm, it should be designed separately and reserved in advance during production. In special circumstances, when opening holes on site, the manufacturer should cooperate to complete it. After the installation of the embedded parts is completed, measurements should be taken, and the allowable positional deviation of the embedded parts is required to be ± 10mm in the vertical direction and ± 5mm in the horizontal direction.
(3) The supports on the steel beams shall be welded according to the arranged dimensions and shall not be welded under load after installation.
(4) The support bracket connected to the concrete wall can be adjusted appropriately when drilling due to the influence of steel bars on hole formation, and the standard support bracket in the diagram can be modified accordingly.
(5) Before the production of steel components, their surfaces should be sandblasted for rust removal, and the quality level of rust removal should meet the national standard; Sa2 level standard.
1. Product specifications
Steel skeleton lightweight panels include standard large roof panels, grid panels, eaves panels, gutter panels, daylighting panels, and various non-standard panel types. The thickness of the core board is generally 80mm-200mm, which can be adjusted according to different insulation and sound insulation requirements.
The height of the ribs is generally between 80mm and 350mm, and can be adjusted according to different loads and plate spans.
The external dimensions are determined according to actual usage requirements, with a single panel span of 10m. It is recommended to use standard specifications as much as possible:
The standard specification for large roof panels is 1500mm × 6000mm
The standard specification for the grid plate is 3000mm × 3000mm
2. Product Structure
The steel frame lightweight floor slab is composed of a light steel frame, high-strength steel wire mesh, BAS inorganic lightweight core material (proprietary technology), and waterproof wear-resistant coating (proprietary technology), and is cast and formed using a unique technique.
AfterSalesService :
Key words:- Steel frame lightweight roof panel
More Products
