Double layer insulation KST board GWB6015 Shenbo steel skeleton lightweight board

Description :

　　KST board Inner Mongolia Bayannur double-layer insulation KST board GWB6015

　　Answer: The price of steel framed lightweight floor slabs varies depending on the specific specifications and area required for the actual roof. We will provide you with a specific quotation based on your drawings

　　The lightweight floor slab with steel frame is composed of light steel frame (cold-formed thin-walled steel) as the main and end ribs, built-in reinforcement ribs and cold drawn low-carbon steel wire mesh, cement perlite composite core material, and anti-seepage and wear-resistant coating.

　　It is a new type of lightweight roof load-bearing inorganic board that integrates functions such as lightweight, load-bearing, durability, insulation, thermal insulation, waterproofing, fire prevention, sound insulation, explosion venting, and earthquake resistance. The construction principle of steel framed lightweight floor slabs and roof panels is similar, but they have higher strength and bearing capacity, and can be used for building load-bearing floor slabs.

　　The product is mainly suitable for building floors such as industrial plants, coal transportation bridges, office and commercial buildings, residential loft mezzanines, etc.

　　1、 Product Introduction:

　　Steel framed lightweight floor panels and lightweight composite insulation grid roof panels combine many excellent properties such as lightweight, high strength, durability, energy saving, insulation, fire resistance, earthquake resistance, and long service life. This board not only has the reliability of ordinary boards, but also absorbs the advantages of other new types of boards, highlighting the lightweight, insulation, energy-saving and other performance of the structure.

　　The product is mainly suitable for roofs of industrial plants, large warehouses, sports venues, water treatment plants, boiler rooms, and civil buildings with equivalent conditions in Class I and Class II environments, and can be used in conjunction with various structural forms.

　　Mechanical vertical pipeline transportation can be used during construction, which shortens working hours and can improve work efficiency by 6-10 times compared to other methods.

　　When installing steel frame lightweight panels, the length of the panel that should be placed on the support should not be less than 60 millimeters. After being in place, the main ribs of the roof panel and floor slab should be welded firmly to the support, and the length of the welding joint should not be less than 60 millimeters. The height of the welding joint should be 4 millimeters, and three-point welding should be ensured. For roof panels and floor slabs with seismic fortification requirements, they should be strengthened according to the connection node method in the standard. For the installation of steel skeleton lightweight roof panels, it is advisable to use structural sloping for the roof, with a slope of no less than 2%. The waterproof layer can be directly applied to the roof panel.

　　Before construction, the main structure should be measured, and the allowable deviation of the main structure is required to be ± 10 millimeters in the vertical direction and ± 25 millimeters in the horizontal direction. If the deviation is too large, a treatment plan should be agreed upon with the relevant construction unit.

　　For the construction of steel frame lightweight wall panels, various preparations should be made before construction, including the preparation of connectors and supporting materials, and the setting out of horizontal and height control lines. Lightweight wall panels should be positioned according to the number, and attention should be paid to the installation sequence. After aligning the wall panels, temporary fixing should be done first, and then the hooks should be removed, and then fixed according to the connection method in the relevant architectural drawings.

AfterSalesService :

• KST board