Guangxi Yulin Steel Skeleton Lightweight Plate 09CJ20 Shenbo Physical Manufacturer
Category:
building materials/Waterproof and fireproof functional materials/insulation material
Model:
09CG12/09CJ20
Brand:
Shen Bo
model:
09CG12/09CJ20
material:
Cement foaming
Soft and hard conditions:
hard
Retail Price
180.00USD
重量
kg
- Product Description
-
model 09CG12/09CJ20
material Cement foaming
Soft and hard conditions hard
Description :
Guangxi Yulin Steel Skeleton Lightweight Plate 09CJ20 Shenbo Physical Manufacturer
The core plate is made of inorganic material, with good stability, anti-aging and service life equal to that of concrete material;
The diameter of the steel wire at the bottom of the board is 3mm or more, the thickness of the protective layer is 20mm or more, and the moisture absorption rate is less than 0.1%.
A steel frame lightweight slab that combines all its advantages certainly requires a good construction process. So, what is the construction process for steel frame lightweight slabs?
Construction Technology of Steel Skeleton Lightweight Plate
Laying out → Installation of lightweight boards → Adjustment of board seam distance → Welding → Jointing → Waterproof coating → Acceptance.
Laying out: After the handover with the previous process is completed, according to the layout diagram, lay out the position of the board edge, and at the same time check whether the layout diagram intersects with the on-site structure.
Installation: Use lifting equipment to gently place the lightweight board onto the steel frame nearby. When the crane cannot be directly positioned, lift the lightweight board onto a specially designed roof transport truck and then move it to the installation position.
Adjust the distance of the board joint: According to the requirements of Beijing 05sg3, adjust the board joint to the allowable deviation range, and the width deviation of the board joint shall not exceed 10mm.
Welding: After installation, according to the connection requirements of the "Steel Skeleton Lightweight Plate Atlas" Jing05sg3 for steel skeleton lightweight plates, weld the plate to the steel roof truss.
Jointing: Pour the prepared lightweight BAS core material into the board joint, and use steel bars to firmly insert the mortar during pouring.
Brushing waterproof coating: After adjusting the BAS polymer coating according to the usage requirements, apply it twice on the surface of the BAS core material, and wait for it to form a film.
Steel skeleton lightweight plate composition
Steel frame:The main ribs are made of cold-formed thin-walled steel with a wall thickness of 2.0-3.0mm, while the end ribs and auxiliary ribs are made of angle steel.
Bentonite material:It is a green and environment-friendly multi-functional composite material, which is compounded by using the "stone forming agent" developed by new materials and introducing matching micro foam in the mixture of cement and inorganic light aggregate.
hardware cloth:Cold drawn low-carbon steel wire welded mesh.
Featured products include:
oneBentonite (sandwich) floor system
A rear mounted mezzanine floor system specifically developed for real estate loft layouts. Prefabricated design makes construction simple and has advantages such as high load-bearing capacity, good sound insulation effect, environmental protection, and comfort.
Let me explain, steel frame lightweight panels are both lightweight and high-strength, and they live up to expectations due to their unique structural design and advanced core materials.
Fire and fire resistance: The core material of the steel frame lightweight board is inorganic, non combustible, and does not burst or release toxic gases in fire. The steel frame lightweight board is an excellent fire-resistant variety, with a fire resistance of more than 2 hours for the entire board, meeting the first level fire protection requirements.
[Steel Skeleton Lightweight Plate] Parameter Specifications
Specification of steel frame lightweight slab: The specification can be determined based on the engineering drawings and the atlas. There are several commonly used specifications for steel frame lightweight panels, including wb6015, wb6030, wb7524, and wb9012; The commonly used specifications for steel frame lightweight floor slabs are: lb2412, lb3012, lb3612; The commonly used specifications for steel frame lightweight wall panels are: qb6015, qb7515, qb9015; The commonly used specifications for steel frame lightweight wharf plates include: 62000mm * 1500mm, etc.
AfterSalesService :
Key words:- Steel skeleton lightweight plate
More Products
