Anhui Wuhu Steel Skeleton Lightweight Floor Board Shenbo New Product Price Reduction

Description :

　　Anhui Wuhu Steel Skeleton Lightweight Floor Board Shenbo New Product Price Reduction

　　Installation: Use lifting equipment to gently place the lightweight board onto the steel frame nearby. When the crane cannot be directly positioned, lift the lightweight board onto a specially designed roof transport truck and then move it to the installation position.

　　Adjust the distance of the board joint: According to the requirements of Beijing 05sg3, adjust the board joint to the allowable deviation range, and the width deviation of the board joint shall not exceed 10mm.

　　Welding: After installation, according to the connection requirements of the "Steel Skeleton Lightweight Plate Atlas" Jing05sg3 for steel skeleton lightweight plates, weld the plate to the steel roof truss.

　　Jointing: Pour the prepared lightweight BAS core material into the board joint, and use steel bars to firmly insert the mortar during pouring.

　　Brushing waterproof coating: After adjusting the BAS polymer coating according to the usage requirements, apply it twice on the surface of the BAS core material, and wait for it to form a film.

　　Acceptance: After welding is completed and self inspection is correct, the site debris is cleared before acceptance.

　　Raw materials must have a certificate of conformity or factory inspection report.

　　Mortar must be poured into the board joints, and the mortar must be firmly inserted during pouring.

　　Allowable deviation: board seam width ± 10mm; board axis offset ± 5mm.

　　The variety of polymer waterproof coatings must meet the design requirements and relevant standard regulations.

　　The joint filling is dense, and the flatness error between the lightweight core material and the surface of the roof panel is 1cm.

　　4. Complete additional supporting facilities. Prefabricated low rise residential buildings optimize indoor layout, improve functional use, place kitchens and bathrooms indoors, provide supporting water supply and drainage systems, and change the traditional living habits of farmers. At the same time, to meet users' pursuit of high-quality life, users can also choose to add new air systems, underfloor heating systems, solar energy systems, sewage treatment facilities, etc. in a menu style, changing the traditional heating method of residential buildings, improving indoor air quality, and enhancing users' living comfort.

　　5. Improvement of engineering quality. Prefabricated low rise residential buildings fully reflect the requirements of modernization in the housing industry, achieving standardized design, modular production, and prefabricated construction. Accelerate the project progress, reduce the impact of human factors on project quality, and at the same time, prefabricated construction can reduce on-site operations without dust and sewage pollution, which is conducive to environmental protection. The construction period from design to decoration and occupancy is about one month, which is at least two months shorter than that of ordinary rural houses.

　　What is prefabricated building new material

　　Prefabricated building materials are new building materials that are manufactured in factories, including floor slabs, wall panels, stairs, balconies, and other building components. After transportation to the site, they are assembled and installed according to the drawings.

　　The market recognition and acceptance of new materials for prefabricated construction always requires a process, but prefabricated construction is a direction for the future development of the construction industry. It is expected that by 2020, the cumulative construction area using steel structures and prefabricated construction technology will reach 2 million square meters, and the proportion of affordable housing and shantytown renovation resettlement housing built using modern construction methods will reach more than 60%.

AfterSalesService :

• Steel skeleton lightweight floor slab