KST board production and installation in Hanzhong, Shaanxi, KST board steel skeleton lightweight board

Description :

　　KST board production and installation in Hanzhong, Shaanxi, KST board steel skeleton lightweight board

　　The loft partition floor adopts new materials and formulas to develop a new type of sandwich floor, which solves the defects of easy bending and deformation, easy water absorption and expansion, easy delamination in the original product. It has higher strength, lower wet expansion rate, stronger impact resistance, higher bearing capacity, and is safer.

　　Scope of use for loft floor slabs

　　The product is mainly suitable for building floors such as coal conveyor bridges, industrial plants, office and commercial buildings, and residential loft mezzanines.

　　Steel skeleton lightweight plate is made of hot-dip galvanized lightweight steel frame, ribs, and cold drawn low-carbon steel wire mesh; Foamed concrete, expanded perlite, cellulose fiber, crack resistant active reinforcement agent; Composed of fiberglass, wear-resistant, anti-seepage, waterproof, and crack resistant mortar structure, using a unique technique and formula, and poured in layers.

　　Laying out: After the handover with the previous process is completed, according to the layout diagram, lay out the position of the board edge and check whether the layout intersects with the on-site structure. The thickness of the core material is generally 100mm, which can be adjusted according to different insulation and sound insulation requirements.

　　The height of the ribs is generally between 100mm and 350mm, and can be adjusted according to different loads and the span of the single board.

　　The external dimensions are determined according to actual usage requirements, with a single panel span of 9m. It is recommended to use standard specifications as much as possible;

　　The standard specification for floor slabs is 1200mm × 3600mm

　　1200mm×6000mm

　　3、 Product Structure:

　　Composed of light steel frame, high-strength steel wire mesh, BAS inorganic lightweight core material (proprietary technology), lightweight aggregate concrete reinforcement layer (anti-seepage), waterproof and wear-resistant coating (proprietary technology), using a unique technique, poured and formed.

　　4、 Product performance indicators and characteristics:

　　Note: The data in this table is for reference only. The specific product technical indicators are subject to the manufacturer's specifications, and the interpretation right lies with the manufacturer

　　The main features are flexible and convenient to use: the board specifications are customized according to the characteristics of the building, and there is no need to lay purlins during use. The board can be perforated, installed with light shields, roof pipes, fans, etc.

　　Easy maintenance: No special maintenance is required during normal use, and the cost of use is low. When there is partial damage, it can be directly repaired on the roof. If it is necessary to replace the board, it can also be replaced with a single board without affecting the overall structure.

　　Economy: It can significantly save the amount of steel used in the support system, shorten the construction period, and achieve significant overall economic benefits.

　　4. Installation and use of steel skeleton lightweight roof panels

　　Easy and fast installation, no wet work on site, single shift installation can reach 2000 square meters per day, mainly including two steps:

　　Placement: After lifting the board into place according to the design requirements, it can be welded and fixed with the roof or grid support bracket.

　　Jointing: After filling the joint with insulation mortar, it can be sealed with a special waterproof and wear-resistant coating.

　　1、 Product Usage:

　　The product is mainly used for lightweight floor slabs that are matched with steel structures, and together with roof panels, forms the lightweight floor and roof system of steel structure buildings. Suitable for building floors such as industrial plants, garages, coal transportation bridges, office and commercial buildings, mezzanine renovations, etc.

AfterSalesService :

• KST board