Henan Xinxiang Steel Skeleton Lightweight Plate 09CJ20 Steel Structure Factory Roof Cover Plate

Description :

　　Henan Xinxiang Steel Skeleton Lightweight Plate 09CJ20 Steel Structure Factory Roof Cover Plate

　　Jointing: Pour the prepared lightweight BAS core material into the board joint, and use steel bars to firmly insert the mortar during pouring.

　　Brushing waterproof coating: After adjusting the BAS polymer coating according to the usage requirements, apply it twice on the surface of the BAS core material, and wait for it to form a film.

　　Acceptance: After welding is completed and self inspection is correct, the site debris is cleared before acceptance.

　　Raw materials must have a certificate of conformity or factory inspection report.

　　Mortar must be poured into the board joints, and the mortar must be firmly inserted during pouring.

　　Allowable deviation: board seam width ± 10mm; board axis offset ± 5mm.

　　The variety of polymer waterproof coatings must meet the design requirements and relevant standard regulations.

　　The joint filling is dense, and the flatness error between the lightweight core material and the surface of the roof panel is 1cm.

　　8 GD steel skeleton lightweight board should avoid sharp heavy object impact

　　There are vehicles passing through.

　　8.9 Steel skeleton lightweight panels should use a leveling layer for slope making, and the slope should not be too small. The flatness can meet the construction requirements of the waterproof membrane laid

　　Directly apply waterproof layer

　　Before installing the 10 CD steel skeleton lightweight plate, the main structure should be measured and the requirements are met

　　When the horizontal deviation of the main structure does not exceed 125mm and the vertical deviation does not exceed ± 10mm, a solution should be negotiated with relevant units.

　　Steel frame lightweight slab is a non combustible building material that has characteristics such as earthquake resistance and bending resistance. In practical applications, steel frame lightweight plate steel can not only relatively increase the load capacity of buildings, but also meet the aesthetic design needs of buildings, and avoid the defects of concrete and other building materials that cannot bend or stretch. Therefore, steel has been favored by the construction industry, and is widely used in single story, multi story, skyscrapers, factories, warehouses, waiting rooms, waiting halls, etc. However, steel, as a building material, has some unavoidable defects in fire prevention. The mechanical properties of steel frame lightweight panels, such as yield point, tensile strength, and elastic modulus, will sharply decrease with increasing temperature.

AfterSalesService :

• Steel skeleton lightweight plate