Hebei Cangzhou Steel Skeleton Lightweight Plate Prefabricated Explosion Relief Plate

Description :

　　Hebei Cangzhou Steel Skeleton Lightweight Plate Prefabricated Explosion Relief Plate

　　4. The steel frame of the plate is welded and formed. The steel frame is welded according to the requirements, and there should be no cracks, weld beads or other defects on the surface of the weld. Each welding point should meet the specifications and technical quality requirements. The bottom mold should be flat and the plastic mold should be leveled. Check whether the steel frame is qualified. If there are unqualified steel frames, they should be repaired and laid neatly. Control the water cement ratio of the concrete well, smooth the surface after pouring, ensure there are no sand holes or marks, and clean the steel frame around with ash.

　　5. Decoration stage ① Waterproof layer: When scraping the anti-seepage sealing coating on the surface of the board, it must be done according to the mix proportion requirements. The mortar should be evenly scraped without smudging, and the surroundings of the steel frame should be clean. ② Puttying: Before applying putty, make sure to level the surface of the board and any uneven areas on both sides. Apply two coats of putty as required, and ensure that the surface is compacted and pressed without any marks. Clean the steel frame thoroughly.

Steel skeleton lightweight plate is an important material for industrial building installation

　　In many hydropower industry construction processes, steel frame lightweight panels are also widely used, because in many of these steel frame materials, the most critical advantage is their performance. Of course, in the installation process, the key to using such lightweight panels is that they are relatively lightweight and can support greater force in suspension. Therefore, the emergence of this type of panel ensures a certain degree of hardness during use, which is the most critical factor.

　　Therefore, in modern industrial construction projects, the use of steel frame lightweight plate materials is also essential. It is an advantageous performance that has been acquired through many template upgrades, which enables it to enter the market and better occupy such advantages, becoming an industrial building installation material in the industry. Nowadays, the advantages of this type of panel are mainly reflected in its reasonable material prices and its ability to be cut for industrial construction projects with different models. It has strong hardness, but its overall weight is very light. It is precisely because of this advantage that it can occupy a great advantage in this market.

Bentonite material:It is a green and environment-friendly multi-functional composite material, which is compounded by using the "stone forming agent" developed by new materials and introducing matching micro foam in the mixture of cement and inorganic light aggregate.

hardware cloth:Cold drawn low-carbon steel wire welded mesh.

Bentonite roof panel:Mainly used for large-span factory buildings, logistics warehouses and other building roof components, it integrates load-bearing and thermal insulation functions, and is a substitute product for color steel plates and concrete roof panels.

Advantages of Bentonite Roof Panels

　　1. By adjusting the cross-sectional dimensions of purlins to meet the needs of loads and engineering, the problem of existing lightweight steel frame slabs under large roof loads and column spacing can be solved. Strong structural integrity. Suitable for buildings with various spans and column spacings.

AfterSalesService :

• Steel skeleton lightweight plate