Steel skeleton lightweight floor panel Guangdong Heyuan explosion-proof lightweight floor panel
Category:
building materials/Waterproof and fireproof functional materials/insulation material
Model:
19CG12/19CJ20
Brand:
Shen Bo
model:
19CG12/19CJ20
material:
Cement foaming
Soft and hard conditions:
hard
Retail Price
180.00USD
重量
kg
- Product Description
-
model 19CG12/19CJ20
material Cement foaming
Soft and hard conditions hard
Description :
Steel skeleton lightweight floor panel Guangdong Heyuan explosion-proof lightweight floor panel Steel skeleton lightweight panel is mainly made of natural inorganic materials, which do not release harmful substances, and the board has good breathability, making living healthy and comfortable; Part of the industrial waste can be utilized in production, which belongs to the product of comprehensive resource utilization. Therefore, steel frame lightweight panels have their own specialized construction techniques.
Material selection and construction of lightweight steel frame panels
The carefully designed combination of the law enables its service life to reach 50 years;
The core plate is made of inorganic material, with good stability, anti-aging and service life equal to that of concrete material;
The diameter of the steel wire at the bottom of the board is 3mm or more, the thickness of the protective layer is 20mm or more, and the moisture absorption rate is less than 0.1%.
A steel frame lightweight slab that combines all its advantages certainly requires a good construction process. So, what is the construction process for steel frame lightweight slabs?
Construction Technology of Steel Skeleton Lightweight Plate
Laying out → Installation of lightweight boards → Adjustment of board seam distance → Welding → Jointing → Waterproof coating → Acceptance.
Laying out: After the handover with the previous process is completed, according to the layout diagram, lay out the position of the board edge, and at the same time check whether the layout diagram intersects with the on-site structure.
Installation: Use lifting equipment to gently place the lightweight board onto the steel frame nearby. When the crane cannot be directly positioned, lift the lightweight board onto a specially designed roof transport truck and then move it to the installation position.
Adjust the distance of the board joint: According to the requirements of Beijing 05sg3, adjust the board joint to the allowable deviation range, and the width deviation of the board joint shall not exceed 10mm.
Welding: After installation, according to the connection requirements of the "Steel Skeleton Lightweight Plate Atlas" Jing05sg3 for steel skeleton lightweight plates, weld the plate to the steel roof truss.
Jointing: Pour the prepared lightweight BAS core material into the board joint, and use steel bars to firmly insert the mortar during pouring.
Brushing waterproof coating: After adjusting the BAS polymer coating according to the usage requirements, apply it to the surface of the BAS core material and wait for it to form a film.
Acceptance: After welding is completed and self inspection is correct, the site debris is cleared before acceptance.
Raw materials must have a certificate of conformity or factory inspection report.
Loft residential projects generally have lower prices than ordinary residential projects, and are charged on a single floor basis, which has great power and is also a selling point of real estate projects. After purchase, the construction of a mezzanine or attic is usually done by the buyer themselves, and three types of support frame modes are generally used for building an attic: reinforced concrete, steel structure, and wooden structure. The selection of panels used is also very wide, such as wooden boards, steel plates, gypsum boards, glass panels, etc.
AfterSalesService :
Key words:- Steel skeleton lightweight floor slab
More Products
