Zhejiang Wenzhou Steel Skeleton Lightweight Plate with Light Weight Quotation

Description :

　　The national building standard design reference atlas based on the application technology of KST board in engineering is compiled in Wenzhou, Zhejiang. The atlas mainly includes the selection table and detailed drawings of roof panels, grid panels, gutter panels, floor panels, and wall panels. The atlas also provides detailed drawings of the connection structure between various panels and the main body for designers to choose from.

　　Scope of application of the atlas:

　　1. Suitable for general industrial and civil buildings in non seismic areas and areas with seismic fortification intensity less than or equal to 8 degrees (0.20g).

　　2. Suitable for buildings in normal environments, without corrosive media, and with an annual average relative humidity of 75% or less.

　　3. Floor panels are suitable for mezzanines, overpasses, and other structures in industrial and civil buildings that only bear vertical loads.

　　4. Roof panels, grid panels, eaves panels, and gutter panels are suitable for industrial and civil buildings with a roof slope of less than or equal to 1/10.

　　5. Exterior wall panels are suitable for general industrial building style wall panels. When used in civil buildings, the waterproofing, insulation, thermal insulation, sound insulation, fire prevention, etc. of wall panels should meet the requirements of relevant regulations.

　　Calculation formula for bearing capacity of steel skeleton lightweight plate components

　　Although steel frame lightweight slab components belong to lightweight aggregate concrete structures, the analysis and planning of component bearing capacity should comply with the design specifications for concrete structures. Unified design and bearing capacity calculation are carried out to address common technical issues in concrete structures of buildings, railways, highways, ports, and water conservancy and hydropower projects. Based on the components, the entire structural system is considered, including structural schemes, internal force analysis, section design, connection structures, durability, construction feasibility, and performance design of special projects. The safety level of concrete structures is determined by the current national standard "Unified Standard for Reliability Design of Engineering Structures" GB 50153. Lightweight aggregate concrete structures and components using aggregates such as ceramic particles, pumice, and coal gangue should be designed according to specific standards.

　　Dedicated to the research and production of new building materials, with multiple patented technologies. The company has two production and manufacturing bases, one research and development sales center, multiple construction and installation teams, and belongs to the industry of lightweight building panels.

　　Technology is only for building houses

　　Development philosophy, closely following the forefront of technological development in the construction industry, adhering to

　　Technological innovation, R&D first

　　Market strategy. After years of effort, the company

　　Mastering the core and key technologies of foamed concrete can effectively solve the problem of drying shrinkage and cracking in foamed concrete products

　　Based on the core technology of foamed concrete, a new type of green and environmentally friendly lightweight board has been developed——

　　To adapt to the development of the prefabricated construction industry, a series of steel frame lightweight panels have been developed, such as roof panels, exterior wall panels, partition panels, floor panels, loft mezzanine small floor panels, etc. Steel skeleton lightweight panels have the characteristics of lightweight, high strength, durability, fire resistance, sound insulation, sound absorption, thermal insulation, and pressure relief, and are suitable for buildings such as steel structures, concrete structures, and brick concrete structures.

　　More surprises are waiting for you.

AfterSalesService :

• Steel skeleton lightweight plate