Boyu Pump Industry Sewage Pump ZW Type Self priming Non clogging Discharge Pump Self priming Discharge Pump Customization
Category:
chemical industry/pump/Sewage pump
Model:
Brand:
Boyu
brand:
Boyu
model:
150BYXZXW300-12
working principle:
centrifugation
Number of impellers:
single-stage
Processing & Customization:
yes
Nominal displacement:
300000000mL/h
rated pressure:
0.12Mpa
nominal diameter:
150mm
material:
cast iron
input power:
22kw
output power:
22kw
rated speed:
1500r/min
overall efficiency:
68%
Diameter of suction port:
150mm
outlet diameter:
150mm
noise:
sixty-eight
Overall dimensions:
1350x840x1140
weight:
three hundred
Place of Origin:
Suzhou
manufacturer:
Jiangsu Boyu Pump Industry Co., Ltd
Retail Price
3,000.00USD
重量
kg
- Product Description
-
brand Boyu
model 150BYXZXW300-12
working principle centrifugation
Number of impellers single-stage
Processing & Customization yes
Nominal displacement 300000000mL/h
rated pressure 0.12Mpa
nominal diameter 150mm
material cast iron
input power 22kw
output power 22kw
rated speed 1500r/min
overall efficiency 68%
Diameter of suction port 150mm
outlet diameter 150mm
noise sixty-eight
Overall dimensions 1350x840x1140
weight three hundred
Place of Origin Suzhou
manufacturer Jiangsu Boyu Pump Industry Co., Ltd
Description :
How much does a self-priming sewage pump cost?
1、 Product Overview of Idle Self priming Sewage Pump
This series of self-priming sewage pump products is based on the self-priming pump products produced by Boyu, and has been optimized and designed by Boyu self-priming pump engineers. It was officially put into operation in September 2013. The mechanical seal components of the self-priming pump that do not need to be filled with water all use mechanical seal products that can be dry ground. In addition, an additional set of vacuum system products can be added to the bracket between the motor and the self-priming pump, which can achieve the effect of quickly discharging water in only 30 seconds. Moreover, the vacuum system carried by the self-priming pump can achieve automatic start stop function after one click start. Under the condition of high suction stroke, the self-priming pump cannot achieve the effect of suctioning liquid, resulting in a decrease in the vacuum degree inside the self-priming pump body. The pump will automatically start to increase the self-priming capacity of the self-priming pump. This series of self-priming sewage pump products, especially used on urban flood control and emergency pump trucks, have achieved good emergency rescue results.
2、 Main features of an idle self-priming sewage pump
1. Before starting the self-priming pump, there is no need to use a tank of water, which meets the needs of a wide range of users: a self-priming pump that can run idle.
2. The idle self-priming sewage pump has a short self-priming time and can absorb water even in the event of a vacuum system failure. However, the suction time can be extended to within 2-5 minutes to release water, avoiding the consequences of the entire system collapsing due to vacuum pump damage when using conventional centrifugal pump products.
3. An idle self-priming pump can suck up various types of sewage and pollutants, and has the effect of a non clogging self-priming sewage pump.
4. Compared to similar imported self-priming pumps, the price has saved a lot of costs, making it an ideal product for users.
5. The vacuum system of the self-priming pump can automatically start and stop without the need for manual supervision like the originally configured vacuum pump, which is a disadvantage of manual start and stop.
AfterSalesService :
Key words:- sewage pump
More Products
