BYXZXW high flow high suction self-priming pump vacuum assisted high suction self-priming pump high flow vacuum assisted self-priming pump

Description :

　　High suction range self-priming pump, vacuum assisted self-priming pump, high flow self-priming pump

　　1、 Overview of High Flow Vacuum Self priming Pump Products

　　The high flow and high suction range self-priming pump is mainly based on the Boyu strong self-priming pump and the open impeller self-priming pump, which adds a set of vacuum auxiliary system. The self-priming pump with added vacuum auxiliary system has improved its self-priming performance to a higher level. If a strong self-priming pump is used, the self-priming height of the vacuum assisted self-priming pump can reach 9 meters, and the flow rate of this pump can be up to 6000m3/h. Therefore, the main advantage of this pump is its wide flow range. The main feature of the vacuum assisted self-priming pump with open impeller self-priming pump is that the anti blocking effect is particularly obvious, and there will be no blockage phenomenon. Moreover, the self-priming capacity can also reach 9 meters. If the liquid being transported contains a large amount of debris, it is recommended to use it. Choosing an open impeller vacuum assisted self-priming pump product is more suitable, but currently the flow rate of this open impeller vacuum assisted self-priming pump is the highest It can only achieve a flow rate of 800m3/h, and if a larger flow rate is needed, a customized production cycle of about one month is required.

　　2、 Service conditions for high flow vacuum self-priming pumps

　　1. The ambient temperature for the use of vacuum assisted self-priming pumps should be less than 50 degrees Celsius, and the temperature of liquids is commonly less than 100 degrees Celsius. Special requirements can be customized.

　　2. The vacuum assisted self-priming pump made of cast iron is suitable for conveying liquids with a pH value of 69, while the vacuum assisted self-priming pump made of stainless steel has a pH value range of 213.

　　3. The weight of the liquid used in the vacuum assisted self-priming pump shall not exceed 1240kg/m3, and the head in the parameter table for transporting sewage shall be 10% lower than that of the clean water type

　　Therefore, when selecting, it should be noted that if transporting sewage, such as requiring a lift of 10 meters, it is recommended to use a pump with a lift of 15 meters.

　　4. The self-priming height of the vacuum assisted self-priming pump cannot exceed the specified range.

　　5. The vacuum assisted self-priming pump has a capacity to suspend particles with a diameter of approximately 20 times the pump diameter, and a fiber length that is 5 times the diameter of the vacuum assisted self-priming pump.

　　3、 Physical picture of vacuum assisted large-diameter and high flow self-priming pump

　　4、 Performance parameter table of high flow and high suction range self-priming pump

　　6、 Ordering Notice

　　Before purchasing a vacuum assisted self-priming pump, it is necessary to select the required vacuum assisted self-priming pump flow rate, vacuum assisted self-priming pump head, as well as the environment in which the vacuum assisted self-priming pump is used, whether the liquid pumped by the vacuum assisted self-priming pump is corrosive, and whether the space for installing the vacuum assisted self-priming pump matches the size of the vacuum assisted self-priming pump.

AfterSalesService :

• self-priming pump