Horizontal hydraulic cold bending machine Jingheng tunnel bending machine price information
Category:
mechanical equipment/Metal forming equipment/Metal forming equipment
Model:
WGJ-250
Brand:
Jingheng
Retail Price
22,000.00USD
重量
kg
- Product Description
-
Description :
Horizontal hydraulic cold bending machine Jingheng tunnel bending machine price information
CNC cold bending machines are now widely available in the market, and they can complete the bending and arching tasks of various types of steel, including channel steel, track steel, and round steel pipes. Different types of steel arches and arches with different angles require different grinding tools. The recognition of the bending machine in the market is very high now. Greatly improving the construction speed of profiles and saving labor for workers.
During work, the required cold-formed steel is pushed between two rollers by an auxiliary gantry bracket, and the hydraulic cylinder is activated to push the dovetail groove and cold-formed roller cold pressed steel. When the required curvature is reached, the hydraulic pressure is turned off. This cold bending operation ensures the strength of the material and greatly improves the efficiency of supporting steel arches. The operation is simple and clear. Compared with the press, the cold bending machine has good working performance. When choosing a steel I-beam cold bending machine on the market, Mr. Wang from Huanai Machinery kindly reminds engineering customers: please distinguish the 250 I-beam cold bending machine on the market, don't just look at the model. 250 is a general term for a model named by many manufacturers on the market. In fact, there are many types of 250 I-beam cold bending machines. Don't just say that the same model is cheaper than yours based on the price. You should judge whether you have bought the 250 I-beam cold bending machine you really want based on the actual working capacity of the machine. In engineering, construction sites are often not flat roads. When encountering construction sites with poor geology, we often use a new type of equipment, which is the I-beam cold bending machine. It can randomly change the price information of the horizontal hydraulic cold bending machine and the precision tunnel bending machine according to the changes in the surrounding rock.
Precautions for using I-beam cold bending machine
Proper use of the I-beam cold bending machine, careful implementation of equipment maintenance, and adherence to safety operating procedures are necessary conditions for reducing equipment failures, extending the service life of the I-beam cold bending machine, and ensuring safe production. The maintenance personnel of the cold bending machine must understand the structure, performance, maintenance methods, and operating procedures of the equipment. Do not start the motor until the fuel tank is filled with oil. Before use, first check if the fuel tank is full. If it is insufficient, it should be filled to prevent the oil pump from emptying. The hydraulic oil used in the I-beam cold bending machine must undergo strict filtration before being injected into the fuel tank. The fuel tank must be cleaned before loading. Usually, it is recommended to use anti-wear hydraulic oil No. 46. The I-beam cold bending machine uses oil as the medium, and it is necessary to clean and maintain the oil and equipment to avoid the effects of scaling or oil leakage. The oil must be kept clean. It should not exceed two months. When replacing, both the filter and the water tank should be cleaned simultaneously. Please note that the filter can be cleaned with kerosene and cannot be brushed with a hard brush. Deterioration, the horizontal hydraulic cold bending machine can still be used after filtration. Price information for Jingheng Tunnel Bending Machine.
AfterSalesService :
Key words:- Hydraulic cold bending machine
