One to one single hopper lifting type spraying machine, Jingheng double hopper spraying unit manufacturer address

Description :

　　One to one single hopper lifting type spraying machine, Jingheng double hopper spraying unit manufacturer address

　　The lifting and spraying machine improves work efficiency, without stopping the machine, and can work continuously. The hopper automatically loads materials, saving manual labor. The size of the machine can be selected according to the construction environment to facilitate construction and increase workload. In terms of machine operation, it is also very user-friendly. The machine can start working as soon as it arrives, and everyone can operate it.

　　When carrying out concrete spraying operations, the liquid rapid setting agent will mix with the mixing agent and undergo corresponding reactions after the nozzle is homogenized. In the process of implementing spraying, due to the varying degrees of unevenness on the rock surface, spraying should be carried out on the concave pits on the rock surface first. During the spraying process, the mortar and cement present in the concrete will effectively stick to the pits and rock cracks, while larger particles will rebound. As the spraying operation time increases, a mortar cushion layer will gradually form on the rock surface, and the rebound will gradually decrease. Under the effective propulsion of high-pressure wind, stones, sand particles, and steel fibers are increasingly sprayed into the mortar layer. When implementing spraying operations, it is necessary to adjust the slump reasonably according to the actual situation. When spraying the arch, the slump should be controlled within the range of 8-10cm. When spraying on the side wall, the slump should be controlled within the range of 12cm-16cm. When there are severe irregularities on the rock surface, secondary spraying should be carried out according to the actual situation. A spraying layer of about 7cm should be applied first in the over excavation area of the arch, and after waiting for 20 minutes for the spraying layer, a second supplementary spraying should be carried out. When spraying on special potholes on the side walls, a spraying layer of about 10cm should be applied first, and after waiting for 15 minutes, a second supplementary spraying operation should be carried out. The manufacturer's address for the one to one single hopper lifting type spraying machine and the Jingheng double hopper spraying unit should be provided.

　　Job responsibility system for spraying machine drivers

　　1. The driver of the spraying machine must undergo training and pass the examination before taking up the post with a certificate.

　　2. We should study business and technical knowledge seriously, be familiar with the structure, performance, and working principle of the sprayer, and be able to use, maintain, upkeep, and handle general faults.

　　3. Seriously implement the Coal Mine Safety Regulations, Operating Regulations, and Operating Regulations, and be responsible for the safety work of this position.

　　4. Firmly establish the concept of safety, do a good job in self-protection, mutual protection, and joint protection, do not engage in illegal operations, and ensure safe production.

　　5. Before starting work, it is necessary to wear labor protection equipment such as safety helmets and dust masks, and take personal protective measures.

　　6. We must stick to our work post, not leave or leave without authorization, and not do anything unrelated to our work during our tenure.

　　7. The driver of the spraying machine is directly responsible for the inspection and maintenance of the equipment in the shift. They should carefully maintain and upkeep the equipment, assist maintenance personnel in carrying out equipment maintenance work, and after the maintenance is completed, be responsible for the trial operation of the spraying machine and the acceptance of the main performance of the equipment to ensure that the spraying machine is in good working condition.

　　8. Coordinate and collaborate effectively among various job types, fully tap into the potential of equipment, and complete the safety production tasks on duty.

　　9. The driver of the spraying machine is the direct responsible person for the civilized and hygienic work of this position, responsible for keeping the entire spraying machine clean and tidy, without floating coal or dust accumulation. The manufacturer's address of the lifting type spraying machine with a single material bucket and a precise double material bucket spraying unit is the same.

AfterSalesService :

• One to one single hopper lifting type spraying machine