Shaanxi Tunnel Climbing Welding Machine Geomembrane Climbing Welding Machine Manufacturer

Description :

　　The new generation of railway tunnel specific climbing welding machines, double welding machines, geomembrane climbing welding machines, tunnel specific climbing welding machines, geomembrane climbing welding machines, three weld seam climbing welding machines, etc. are widely used in the construction of secondary lining EVA waterproof boards or HDPE waterproof boards for tunnels, railways, subways, reservoirs, highways, landfills, building waterproofing and other projects. The welding process is seamless and smooth between the base materials, with excellent quality characteristics after welding. The climbing welding machine has excellent performance, easy operation, high welding speed, and good welding quality during welding. The climbing welding machine adopts automatic constant temperature PID control for welding temperature; Advanced thermal wedge structure, lightweight and compact design with ultra-high power, high control accuracy, and minimal temperature fluctuations. The climbing welding machine adopts pulse width modulation (PWM) automatic voltage stabilization high-speed circuit, driven by DC servo motor, with large output torque and smooth walking. Can maintain a constant speed during climbing, vertical crawling, and changes in road load. The input of the climbing welding machine equipment is voltage 220V, frequency 50Hz, power 550W, welding speed 0-4 meters/minute, heating temperature 0-450 ℃, welding material thickness 0.3mm-2.0mm, weld width 10mm3, middle cavity 10mm 2, weld strength ≥ 85% of the base material (tensile strength in shear direction), machine weight 5.5KG, rolling wheel, rubber wheel or steel wheel insulation grade ∥, lap width 0cm, 15cm, 18cm, 20cm, etc

　　Function of geomembrane welding machine

　　1. Electric heating system: The heating temperature of the electric wedge adopts closed-loop control, and the temperature can be continuously adjusted. Adjust the thickness of the material to the corresponding pressure position for welding.

　　2. Welding pressure regulation system: capable of continuous adjustment.

　　3. Transmission system: Adopting dual wheel synchronous drive of upper and lower pressure rollers, with electronic continuously variable transmission control. The automatic control system is equipped with a speed generator to regulate the welding speed and maintain it constant, unaffected by load changes. Power is transmitted to the transmission/compression wheel through three-stage planetary gear reduction.

　　Shaanxi Tunnel Climbing Welding Machine Geomembrane Climbing Welding Machine Manufacturer

AfterSalesService :

• Tunnel climbing welding machine