CNC 42 Small Pipe Tip Shrinking Machine Precision Constant Small Pipe Tip Shrinking Forming Machine Market

Description :

　　CNC 42 Small Pipe Tip Shrinking Machine Precision Constant Small Pipe Tip Shrinking Forming Machine Market

　　The small pipe taper machine plays a crucial role in the construction industry. A small conduit is an indispensable step in construction, as it can effectively penetrate into the wall. The pointed end at the front is relatively easy to penetrate, and the small holes on the steel pipe wall are added to enhance the strength of the surrounding rock. The small tube taper machine has a fast taper speed, and the taper of a pipe can be completed within one minute.

　　The general measurement for grouting support of small conduits is as follows: steel pipe diameter - mm, steel pipe length - m, steel pipe drilling grouting hole spacing - mm, steel pipe circumferential arrangement spacing along the arch - mm, steel pipe circumferential insertion angle along the arch is ° 1 °, and small conduits are load-bearing members. Therefore, there should be a certain overlap length between two rows of small conduits in the longitudinal direction. The overlap length of steel pipes in the longitudinal direction is generally not less than m. Before installing the conduits, the working face should be sealed tightly and firmly, cleaned up, and the drilling position should be measured before construction. When using small conduits for reinforcement, for the working face and excavation, the correct installation position and sufficient effective length of the small conduits should be ensured, and the drilling angle of the small conduits should be strictly controlled. CNC 42 small conduit taper machine Jingheng Small Tube Shrinkage Forming Machine Market.

　　The stamping die and pump station pressure of the small pipe shrinking machine can be adjusted. Advanced small pipe tip machine, construction steel support round pipe tip, hanging basket square tube tip, steel formwork angle iron tip, display rack tip, protective fence tip, etc. Feeding power: using high torque AC synchronous servo motor, it has the characteristics of fast response, high positioning accuracy, low noise, small braking heat loss, and long service life. Motion control: Advanced PLC controller, screen operation, simple and convenient. Life guarantee: All parts of this equipment are high-quality accessories, and the basic parts are processed using CNC machining centers with high assembly accuracy, maximizing the service life of the equipment. Equipment working principle: The small conduit bears the pressure of the formation during excavation. To ensure grouting and prevent leakage, a sealing hole needs to be set at the tail of the small conduit. The grouting method should be selected according to the soil conditions for grouting construction: infiltration grouting method should be used in sand and gravel formations; It is advisable to use infiltration grouting method in sand layers; In the clay layer, it is advisable to use splitting or electric silicification grouting method. CNC 42 small pipe shrinking machine and precision constant small pipe shrinking forming machine should be used;

AfterSalesService :

• CNC 42 small pipe taper machine