Pipe shed 50 small pipe shrinking machine, precision constant grouting small pipe shrinking forming machine

Description :

　　Pipe shed 50 small pipe shrinking machine, precision constant grouting small pipe shrinking forming machine

　　The small pipe taper machine plays a crucial role in the construction industry. A small conduit is an indispensable step in construction, as it can effectively penetrate into the wall. The pointed end at the front is relatively easy to penetrate, and the small holes on the steel pipe wall are added to enhance the strength of the surrounding rock. The small tube taper machine has a fast taper speed, and the taper of a pipe can be completed within one minute.

　　Operation steps of small catheter tip shrinking machine equipment:

　　1. Place the pipe fittings at the feeding mechanism (with the front end inside the induction heating furnace ring);

　　2. Step on the heating furnace start switch and set the time to 8 seconds. When the time is up, the heating area of the pipe will have turned red and black;

　　3. Step on the start switch of the feeding mechanism, feed the mechanism pipe fittings, and the mechanism feeds into the shrinking machine under the action of the pushing cylinder;

　　4. After forming within the set shrinking time, the feeding mechanism will automatically retract to bring back the finished product, the clamping mechanism will be released, and the finished product forming pipe shed will be 50 small pipe shrinking machine, precision constant grouting small pipe shrinking machine!

　　Research and development of heating equipment/small tube heating pointed machine:

　　After drilling, insert the small guide pipe into the hole according to the design requirements, or use a rock drill to directly drive the small guide pipe from the upper and middle parts of the steel frame, and support it on the steel frame behind the excavation face by 20cm, forming a pre support system together with the steel frame.

　　1. Before processing the small conduit, its surface, stains, soil, and other debris must be cleaned.

　　2. The end of the advanced small conduit rock mass must be processed into a conical shape with a length of 20cm, and the tail must be welded with a steel reinforcement hoop of Φ 8.

　　3. The advanced small guide pipe body needs to be drilled with a drilling machine with a diameter of 8 grouting holes, with a spacing of 15cm between grouting holes arranged in a plum blossom shape, and a 30cm grout stopping section left at the tail end.

　　4. After drilling, iron chips must be used and the burrs in the grouting hole must be ground flat.

　　5. The design length of a single advanced small pipe is 4 meters, and the pipe shed is 50 meters. The small pipe shrinking machine is a precision grouting small pipe shrinking machine.

AfterSalesService :

• Pipe shed 50 small pipe taper machine