Liaoning geomembrane climbing welding machine tunnel anti-seepage membrane welding equipment
Category:
mechanical equipment/Welding and cutting equipment/Plastic welding machine
Model:
JH10/JH15/JH20
Brand:
Jingheng
Retail Price
2,700.00USD
重量
kg
- Product Description
-
Description :
Liaoning geomembrane climbing welding machine tunnel anti-seepage membrane welding equipment
When the material is welded to the end, press the lever handle in time to separate the upper and lower pressure wheels to prevent the rubber wheels from burning out for too long. Due to thermal inertia, if the temperature is too high or too low during the welding process, temperature deviation can be compensated for by adjusting the speed within a small range. Due to the slightly lower thermal conductivity of stainless steel compared to copper, the welding speed of stainless steel wedges should not be too fast. The welding material is welded to another material using a "T" - shaped lap welding method. The overlap at the edge of the hot wedge is marked by a weld seam that has been diagonally shifted by approximately 100 millimeters in length.
Crawler welding machines are often used in some industrial production, and they are easy to operate. Generally, they can directly lay geotechnical materials, and then weld the joints with a crawler welding machine or hot air blower, and then apply cement mortar on the outside. Because this device has not been in use for a long time and has not been on the market for a long time, users have encountered a situation when using the climbing welding machine, which is that the machine mechanism equipment has a leakage problem. However, it can be used normally without water. If water appears on the ground during use, it will trip as soon as it is used. Let me tell you that if this situation occurs, it means that the shell of the mechanical equipment has a leakage problem. Just place a board at the bottom of the mechanical equipment to use it normally.
If there is a leakage of electricity when using a climbing welding machine, and the fault phenomenon is different from the above and cannot be solved by the above methods, it is highly likely that the internal parts have been damaged. In this case, it is generally necessary to send the mechanical equipment to the electrical tool store maintenance department for repair and inspection.
AfterSalesService :
Key words:- Geomembrane climbing welding machine
