Hebei PVC waterproof board climbing welding machine tunnel geomembrane welding machine

Description :

　　Hebei PVC waterproof board climbing welding machine tunnel geomembrane welding machine

　　Crawler welding machine is suitable for welding various soluble materials. Climbing welding machines play an important role, but relevant preparation work needs to be done before use. The following is an introduction to the welding methods of climbing welding machines. In construction projects, it is necessary to use a climbing welding machine, start the generator, and then connect the power cord. When using a climbing welding machine, please set the temperature in advance after connecting the power. The set temperature is usually between 420 and 450 degrees Celsius. If a climbing welding machine is used, the temperature of the welding machine should be set between 220 ° C and 280 ° C after insertion. Do not start welding immediately after setting the temperature, wait for three minutes for preheating, and conduct trial welding after the temperature stabilizes. If the trial welding is qualified, the parts to be processed can be formally welded based on the temperature, temperature, and pressure adjusted during the trial welding period. During construction, if there is significant slope movement on the construction site, it is necessary to hang a soft ladder on the slope and have the construction personnel fasten their safety belts and ropes before construction can begin. Environmental pollution is also an important issue at present. If pollutants are not treated properly, it will affect the surrounding environment and people's health. When using crawling welding machines for tunnel construction, people must master the correct construction methods to ensure smooth construction.

　　The principle of the protective measures adopted by the specially developed climbing welding machine for leakage is that the climbing welding machine can be used normally without water. If water appears on the ground during the use of the climbing welding machine, it will trip as soon as it is used. Through the tripping protection, it tells everyone that there is leakage in the shell of the climbing welding machine equipment. If you want to solve this problem, just place a board at the bottom of the climbing welding machine mechanical equipment to use it normally. If there is a leakage in the climbing welding machine and the method of raising it does not work, and the fault phenomenon is different from the above, it is highly likely that the internal parts of the climbing welding machine have been damaged.

AfterSalesService :

• Waterproof board climbing welding machine