50 Small Pipe Punching Machine, Precise Grouting Small Pipe Forming Machine, Factory Delivery

Description :

　　50 Small Pipe Punching Machine, Precise Grouting Small Pipe Forming Machine, Factory Delivery

　　Punching machines have been widely used in tunnel construction. The punching machine can set 200 holes on one pipe, and the machine is matched with a servo motor. The hole spacing error is within ± 0.3mm, and the punching speed is fast, which greatly improves the manual cutting speed compared to before. The circular holes are also relatively neat and beautiful.

　　There may be more nicknames for small tube punching machine, but these are the ones we commonly see in our daily lives, so we just need to master them. When we hear these nicknames in the future, we will know what they are. The small pipe punching machine bears the pressure of the formation during tunnel excavation. To ensure the quality of grouting and prevent leakage, a sealing hole needs to be set at the tail of the small pipe punching machine. The grouting method should be selected according to the soil conditions for grouting construction: infiltration grouting method should be used in sand and gravel formations; Squeezing and infiltration grouting methods should be used in sand layers; Splitting or electric silicification grouting method should be used in clay layers; It is advisable to use high-pressure jet grouting method in the soft soil layer of silt. The grouting material should have good injectability, and after consolidation, it should have a certain strength, impermeability, stability, durability, and small shrinkage. The grout should be non-toxic, and the grouting process should be simple, convenient, and safe. The selection and proportioning of grouting materials should be determined based on engineering conditions and determined through experiments. The 50 small conduit punching machine, precision constant grouting small conduit forming machine should be sent out of the factory.

　　Features:

　　1. Humanized operation interface, only need to input the hole coordinate parameters of the product to process the product, without the need for professional programming personnel.

　　2. Control system: Touch screen operation interface+FATEK digital control system+Taiwan Delta servo system.

　　3. Wide processing range: By changing the mold, it can process holes ranging from 3.5mm to 40mm (customized according to customer requirements).

　　4. This machine can process full or half holes on complex shaped workpieces and achieve automatic cutting.

　　5. This machine can continuously process unlimited holes and store more than 100 product processing parameters.

　　6. In terms of product retrieval, it can be searched by serial number, serial number, or line by line.

　　7. Machine tool adjustment is convenient, mold change is quick, and can greatly save machine adjustment time.

　　8. Automated processing products have good consistency and more stable product quality.

　　9. This model is suitable for punching and cutting any workpiece with equal or unequal distance hole spacing. It is a 50 small pipe punching machine, precision constant grouting machine, and small pipe forming machine.

AfterSalesService :

• 50 Small Pipe Punching Machine