Seamless steel pipe small pipe punching machine Jingheng 50 small pipe small pipe punching machine sales manufacturer

Description :

　　Seamless steel pipe small pipe punching machine Jingheng 50 small pipe small pipe punching machine sales manufacturer

　　Punching machines have been widely used in tunnel construction. The punching machine can set 200 holes on one pipe, and the machine is matched with a servo motor. The hole spacing error is within ± 0.3mm, and the punching speed is fast, which greatly improves the manual cutting speed compared to before. The circular holes are also relatively neat and beautiful.

　　The advanced small pipe CNC steel pipe punching machine is a device launched by Xinxiang Zhongtong Technology in 2015 according to market demand. It is specifically designed for automated punching of advanced small pipes, and can automatically punch various holes required by the drawing. It can process various shaped profiles such as round pipes, square pipes, angle steels, etc. Parameters of Tunnel Small Pipe Tip Machine:

　　1. Feeding power: Adopting a high torque AC synchronous servo motor, it has the characteristics of fast response, high positioning accuracy, low noise, small braking heat loss, and long service life.

　　2. Motion control: Adopting advanced PLC controller, touch screen operation, simple and convenient

　　3. Life guarantee: The standard parts of this equipment are all premium accessories, and the basic parts are processed using CNC machining centers, with high assembly accuracy and maximum extension of equipment service life.

　　4. The CNC chassis is the command center of the machine, responsible for feeding, controlling the punching speed, and adjusting production efficiency.

　　5. Stamping molds are the core of the entire machine, and their accuracy and quality directly determine the quality of the product.

　　6. Small pipe tip processing equipment, the settings of these parts are controllable, the program of the CNC chassis can be changed, the stamping mold can be replaced, and the pressure provided by the pump station can be adjusted. Seamless steel pipe small pipe punching machine with a precision of 50. Small pipe small pipe punching machine sales manufacturer.

　　How to install the small pipe punching machine mold:

　　1) Before installing the mold for the small pipe drilling machine, it is necessary to first confirm that the cutting edge of the mold is sharp, there are no broken edges on the concave mold cutting edge, and there are no missing corners on the convex mold. If there is a broken edge or missing corner, please sharpen the edge first.

　　2) Before closing the mold, a silicon steel sheet should be placed between the upper and lower molds to prevent damage to the cutting edge due to handling.

　　3) Before installing the punch press on the mold, use an oilstone to grind off the burrs on the bottom and top, and clean up the garbage with a cloth strip. If there are burrs or debris on the upper and lower surfaces of the mold, it will cause the burrs on the punching plate to exceed the tolerance.

　　4) When the slider stroke reaches the position to press the upper mold, it is necessary to ensure that the mold handle or the flat surface of the mold frame is tightly adhered to the bottom surface of the slider, and the screws of the lower mold plate are gently pressed. Then, slide upwards and remove the middle silicon steel sheet. Loosen the screws of the lower mold plate, slide down the slider until the convex mold enters the concave mold by 3-4mm, and tighten the screws of the lower mold plate. When punching new molds, the convex mold must enter the concave mold by 3-4mm, otherwise, the convex mold will collapse or the concave mold will crack.

　　5) Raise the slider of the small tube punching machine to the top dead center position, stop the screw of the punching rod until the tightness is appropriate, and then rotate it several times to observe whether the mold and various mechanisms of the punching machine are working properly. If there are no abnormal situations, we can start producing seamless steel pipe small pipe punching machine Jingheng 50 small pipe small pipe punching machine sales manufacturer.

AfterSalesService :

• Seamless steel pipe small pipe punching machine