Support grouting small pipe punching machine Jingheng subway small pipe punching machine retail price

Description :

　　Support grouting small pipe punching machine Jingheng subway small pipe punching machine retail price

　　Punching machines have been widely used in tunnel construction. The punching machine can set 200 holes on one pipe, and the machine is matched with a servo motor. The hole spacing error is within ± 0.3mm, and the punching speed is fast, which greatly improves the manual cutting speed compared to before. The circular holes are also relatively neat and beautiful.

　　In fact, many places use small pipe punching machines. The small pipe punching machine can process various types of plates and steel pipes. The new CNC punching machine has better processing effects compared to the original punching machine. The original punching machine may actually have positional errors during the processing, but for CNC punching machines, such problems generally do not occur. Because the overall operation of the CNC punching machine is set by the system. The CNC small pipe punching machine has been increasingly promoted. With more promotion, many people have started to pay attention to mechanical maintenance. The processing intensity of the machine is very high, which puts high demands on the maintenance of the machine. Next, we will provide you with a detailed introduction.

　　1. It is necessary to take regular protective measures, clean the exterior, and ensure that there are no debris on the body.

　　2. The motor is often investigated for displacement or abnormal noise when turned on.

　　3. Is the clamping and separation of the pneumatic part flexible, and is the pneumatic action naturally suction and pull. Regularly check if the air nozzle is leaking, etc.

　　4. Whether punching meets the planning policy, whether the mold has an old mouth, etc.

　　So, the daily maintenance of the small pipe punching machine must be done properly, because this is a key issue that can extend the service life of the small pipe punching machine. Drilling is the process of using a drill bit to drill holes in processed materials, while punching is the process of using gravity to punch a needle into a hole. Punching machines are suitable for processing soft materials because the holes drilled by drilling machines may have burrs and unevenness. At the same time, Xinxiang Zhongdong Mechanical and Electrical Equipment Co., Ltd. has perfectly solved the problem of small pipe punching machines often causing cracks in processed materials when punching hard materials. Support grouting small pipe punching machine Jingheng subway small pipe punching machine retail price.

　　Precautions for pipe punching machine during operation.

　　1. Workers must not wear gloves with loose threads when operating the punching machine, as the punching machine is a high-speed equipment and the threads of the gloves are easily entangled in the equipment, causing harm to the human body. Other objects such as ropes should not be placed in the operating area or workbench to prevent injury caused by the drilling machine being stirred during operation.

　　2. During the operation, if it is necessary to adjust the speed, stroke, clamping tools and workpieces, or wipe the equipment, it must be done in a parked state. When installing and unloading the drill bit, a special key must be used and a hammer cannot be used to strike, to prevent deformation of the central connecting shaft.

　　3. Power off after work every day, clean with a cloth, regularly maintain key parts, and if there are any abnormalities, promptly check for faults and repair them.

　　4. It is prohibited to operate the equipment under malfunction. After closing the main brake of the machine tool, clean the machine tool and the work site. Before starting the equipment each time, check whether the various components of the drilling machine are normal.

　　The development prospects of the small tube punching machine market are broad, which directly promotes the intensification of market competition. Nowadays, in addition to some common punching machine brands, small-scale punching machines of all sizes are also blooming everywhere on the market. However, except for a few stainless steel punching machine enterprises, there are not many punching machine brands, such as support grouting small pipe punching machines, Jingheng subway small pipe punching machines, and retail prices.

AfterSalesService :

• Support grouting small pipe punching machine