Geomembrane climbing welding machine tunnel double weld hot melt welding machine
Category:
mechanical equipment/Welding and cutting equipment/Plastic welding machine
Model:
JH10/JH15/JH20
Brand:
Jingheng
Retail Price
2,700.00USD
重量
kg
- Product Description
-
Description :
Geomembrane climbing welding machine tunnel double weld hot melt welding machine
Product characteristics of geomembrane climbing welding machine
1. The PID temperature control system adopts imported temperature sensors and industrial grade control chips for more stable and efficient temperature control.
2. The PWM broadband speed regulation system operates without being affected by external power fluctuations, coupled with a specially designed high torque motor, making crawling smoother.
3. Improved special upper and lower pressing wheel material, more temperature resistant and wear-resistant.
4. The hot wedge knife with a unique copper alloy formula greatly extends its service life.
The leakage of fish ponds directly affects the survival and growth of fish. The service life of general anti-seepage membranes can reach more than 10 years, so the construction of anti-seepage membrane welding is particularly important. The anti-seepage membrane for fish ponds is made of non-toxic and odorless high-density polyethylene particles. The anti-seepage membrane of the fish pond is welded using a climbing welding machine. Parts that cannot be welded by a climbing welding machine should be welded using an extrusion welding machine. The extrusion welding machine should be matched with the same welding rod as the raw material to form a single weld for surfacing. Before laying anti-seepage film in the fish pond, the pond should be compacted and leveled. When laying anti-seepage film in the fish pond, the anti-seepage film should be compacted with soil to prevent wind from blowing. When welding the anti-seepage membrane in the fish pond, a certain amount of expansion should be retained to prevent the weld seam of the anti-seepage membrane from cracking due to thermal expansion and winter cold shrinkage, and the absence of crushed stone roots should be allowed to prevent the formation of the anti-seepage membrane. Next, use a climbing welding machine for welding. After laying the anti-seepage film, the overlap width between the films should not be less than 10cm, usually around 10cm-15cm. Crawling welding machine is used to weld the geomembrane into a whole, which has good anti-seepage effect.
AfterSalesService :
Key words:- Geomembrane climbing welding machine
