Grouting pile mud purification separator Jingheng JH-200 sediment separator manufacturer

Description :

　　Grouting pile mud purification separator Jingheng JH-200 sediment separator manufacturer

　　The sediment separator is mainly used for circulating water in pile driving, which can filter out 98% of sand and greatly reduce the possibility of drilling being stuck. It can speed up our construction process. It also greatly reduces the amount of mud to be processed in the later stage of the project. The turbid mud from the sediment separator can be recycled for pile driving, and the dry materials are mainly fine sand and small particle stones. Dry materials can be used for backfilling.

　　A backwash branch is installed at the outlet of the slurry pump in the slurry purification device to connect with the slurry storage tank. By using the backwash branch, the sediment in the slurry storage tank can be disturbed, preventing the tank from accumulating and overflowing due to long-term use. In the mud circulation, a liquid level float (8) between the middle storage tank and the mud storage tank maintains a constant liquid level in the mud purification device's mud storage tank. Once the output of the slurry in the storage tank exceeds the supply, the liquid level float will fall with the decrease of the liquid level. At this time, the slurry in the middle storage tank will be transferred to the storage tank through the opened slurry replenishment pipe, and the liquid level will rise and return to its original state. The liquid level float will also rise and seal the slurry replenishment pipe in the middle storage tank; If the supply of slurry exceeds the output, the overflow pipe of the slurry storage tank will overflow to prevent the tank from overflowing. When higher mud is required, the mud sorting in the cyclone can be repeated through the total slurry inlet to achieve the goal of grouting pile mud purification separator Jingheng JH-200 sediment separator manufacturer.

　　How to reduce or eliminate the pollution of drilling fluid to the surrounding environment of the well site

　　1. Add solidifier to the drilling fluid after drilling to harden it and prevent environmental pollution.

　　2. For formations that can use solid free drilling fluid, it is recommended to use solid free drilling fluid as much as possible. Firstly, it is convenient for cleaning rock debris. Secondly, there is no need to replace the slurry. Thirdly, the drilling fluid can be reused.

　　3. Use drilling fluid to allow the rock debris to settle completely in the circulation tank as much as possible, making it easier to clean the rock debris.

　　4. Conditional drilling teams use mud removal machines to reduce solid content and extend the service life of drilling fluids.

　　5. Use upper well drilling fluid to drill the topsoil layer.

　　6. Try to add or not add inorganic salts, especially sodium salts, as well as organic polymer compounds that are not easily degradable, to the slurry purification separator for injection piles. Jingheng JH-200 sediment separator manufacturer.

AfterSalesService :

• Grouting pile mud purification separator