Factory price of Jingheng JH-200 mud purification device for grouting pile mud purification separator

Description :

　　Factory price of Jingheng JH-200 mud purification device for grouting pile mud purification separator

　　The sediment separator is mainly used for circulating water in pile driving, which can filter out 98% of sand and greatly reduce the possibility of drilling being stuck. It can speed up our construction process. It also greatly reduces the amount of mud to be processed in the later stage of the project. The turbid mud from the sediment separator can be recycled for pile driving, and the dry materials are mainly fine sand and small particle stones. Dry materials can be used for backfilling.

　　Improve the performance of drilling fluid and meet the requirements of high-pressure jet drilling new technology. Check whether the connecting bolts of the sludge drying equipment rack are tightened, whether the filter plates are arranged neatly, and whether the hole positions are aligned. For open flow sludge drying equipment, the outlet water nozzle should be installed at the lower end of the filter plate and tightened; If the user requests the use of a liquid receiving tray or flipper, the base of the entire machine should be a certain size higher than the base surface, leaving space for the liquid receiving tray or flipper. When using a peripheral scraper, the peripheral linear velocity should not exceed 3m/min, otherwise the settled sludge around will be stirred up, resulting in a decrease in sedimentation efficiency. (2) The requirement for sludge discharge operation is to both completely discharge the sludge and increase the sludge concentration. The length of sludge discharge time depends on the amount of sludge, the flow rate of the sludge discharge pump, and the required sludge concentration for the concentration tank. Two separate filter cakes become a single filter cake. When two separate filter cakes are about to become one, pressure imbalance occurs. Once the dry solid completely fills the chamber, the feed pressure cannot be evenly diffused from the feed channel to all filtration areas. The injection pile mud purification separator Jingheng JH-200 mud purification device is priced at the factory.

　　Attention: Non staff members are not allowed to open the electrical control cabinet for inspection without authorization when the circuit malfunctions. The electrical components inside the control cabinet should not shake during operation. Otherwise, it is necessary to check whether the connectors are tightened, whether the equipment installation foundation is flat, and whether the vibrating screen and pump are working properly. In rainy or snowy weather or when there is mud splashing, attention should be paid to the protection of the electrical control cabinet and motor. When construction is carried out in cold northern regions during winter, attention should be paid to emptying the pump slurry after stopping the pump to avoid freezing and cracking the pump body. Check the slurry storage tank and do not allow any foreign objects with a particle size exceeding 2mm to prevent blockages in the pump and cyclone. When opening the vibrating screen, pay attention to the working noise, which should not exceed 80 decibels, and there should be no abnormal "clicking" sound. The vibration motor has been running for less than 100 hours, which is the initial operation period. During the initial operation period, each shift should check the tightness of its connecting bolts once. When the equipment is running, do not use V-belts, vibration motors, or springs to avoid injury. Due to the cooling effect of pumping, the Jingheng JH-200 mud purification device is priced at the factory as a slurry purification separator for injection piles.

AfterSalesService :

• Grouting pile mud purification separator