Pneumatic slurry sampler has a long service life and is a manufacturer of slurry pipeline sampling machines

Description :

Slurry Sampling Machine Manufacturer, Slurry Sampling Machine Principle, Pipeline Automatic Sampling Machine, Pneumatic Sampling Machine, Pneumatic Slurry Sampling Machine, Slurry Automatic Sampling Machine, Fully Automatic Slurry Sampling Machine, Slurry Automatic Sampling Machine, Slurry Pipeline Sampling Machine, Slurry Sampling Machine Price, Pipeline Sampling Machine, Pneumatic Slurry Pipeline Sampler, Pneumatic Slurry Sampler, Slurry Pipeline Sampling Machine, Slurry Sampling Machine

The fully automatic slurry pipeline sampling machine has replaced traditional manual sampling, and the sampling effect and quality have been recognized. However, due to the fact that most workers cannot operate it, the service life of the sampling machine has been reduced. The main reason is that the technical parameters, technical characteristics, and operating methods of the sampling machine are not understood. Below, I will take you to have a deeper understanding of the pneumatic slurry sampling machine.

1. Technical parameters

1) Slurry pipeline specification: FYDN can be customized according to the actual size of the customer's pipeline with a diameter of 50-900mm as needed

2) Technical parameters and requirements: Installation angle 0~60 °; The working voltage of the controller is AC380V; Sampling period 2-60 minutes (adjustable); Sampling time: 3.5 seconds per time.

3) Technical parameters and requirements: The specifications of the flange at both ends of the sampling machine and the flange of the slurry pipeline must be consistent for easy installation and replacement. The sampling machine adopts thick walled seamless steel pipe, and the material of the sampling pipe is 1Cr18Ni9; The guide tube adopts QSn4-4-4; Other components are made of steel, and each sampling machine is equipped with one controller.

2. Technical characteristics of equipment

1) High sampling accuracy and adjustable sampling volume;

2) Pipeline installation, no height difference required, no loss of slurry;

3) Intermittent operation with extremely low failure rate.

4) In 2011, frequency conversion technology was introduced to make slurry sampling more accurate and reliable.

3. Operation method

1) Turn on the power switch and display "0008" indicating the test status (8 seconds). Press the setting button lightly to start the reverse operation. When it displays "0000", the motor starts working normally.

2) Press the setting button for less than 2 seconds, the second display will flash and enter the second adjustment state. Press the time selection button to select the second time. Press the setting button again for less than 1 second, the minute display will flash and enter the minute adjustment state. Press the time selection button to select the time. After completing the time adjustment, lightly press the setting button to save the set time. Press lightly to start working.

3) This machine has a memory function. If there is a power outage, there is no need to adjust it. After a power outage, simply press the settings button lightly to start working normally.

4. Packing list: one instruction manual and one certificate of conformity; One sampling machine and one control box; One set of connecting flanges and one set of matching sealing rings

Our persistent pursuit has always been to learn from others' strengths and innovate. Therefore, Shandong Coal Mining Equipment Co., Ltd. will spare no effort to solve practical problems in coal mine sites, improve the accuracy and automation of slurry analysis and detection, optimize production conditions, and warmly welcome customers and friends to visit and guide us for consultation and cooperation.

AfterSalesService :

• Slurry pipeline sampling machine