DN200 pneumatic pipeline sampler with long service life and automatic pipeline sampling machine price

Description :

　　Slurry Sampling Machine Manufacturer, Slurry Sampling Machine Principle, Pipeline Automatic Sampling Machine, Pneumatic Slurry Sampling Machine, Slurry Automatic Sampling Machine, Slurry Sampling Machine Manufacturer, Function of Slurry Sampling Machine, Slurry Sampling Machine Price, Slurry Sampling Machine Model, Slurry Sampling Machine Working Video

　　We all knowIn some mines, a lot of slurry is not discharged through pipelines, but through drainage channels, especially the tailings are discharged into the concentration tank.The slurry pool and trench are relatively deep, making manual sampling difficult, especially in winter when the temperature is too low. Manual sampling is often treated lazily. In response to thisOur company has developed a fully automatic pipeline slurry sampling machine, which adopts photoelectric program control technology for the electrical part. The start and stop time is accurate, and there are complete protective electrical appliances. The control is simple, the action is sensitive, and it is fully reliable.

　　1Technical requirements for equipment:

　　one）The casing of the sampling machine is made of seamless steel pipes with a thickness of 5mm, and the inner wall of the pipe is lined with ceramicNai millLayer, with an operating lifespan of 6-8 years or more. In 2012, flame spraying technology andTe ShuThe composite material enables this product to achieve a lifespan of over 15 years.

　　2）The flange installed on each sampling machine is produced according to GB811-59: working pressure of 1.0MPa.

　　3）The material used for the sampling machine is as follows: motor: Y80M-4-4; Pipeline: Thick walled seamless pipeline; Sampling tube: 1Cr18Ni9; Guiding tube: QSn4-4-4; Other components: steel parts.

　　twoTechnical characteristics of the equipment

　　1）High sampling accuracy and adjustable sampling volume;

　　2）Pipeline installation, no height difference required, no loss of slurry;

　　3）

　　1）Turn on the power switch and display "0008" indicating the test status (8 seconds). Press the settings button lightly to startWhen reversing jiWhen displayed as "0000", the motor starts working normally.

　　2）Press the setting button for less than 2 seconds, the second display will flash and enter the second adjustment state. Press the time selection button to select the second time, and press the setting button again for less thanone secondThe minute display flashes and enters the minute adjustment mode. Press the time selection button to select the time. After completing the time adjustment, lightly press the settings button to save the set time. Lightly press the set time to start working.

　　3）This machine has a memory function. If there is a power outage, there is no need to adjust it. After a power outage, simply press the settings button lightly to start working normally.

　　Our persistent pursuit has always been to learn from others' strengths and innovate. Therefore, Shandong Coal Mining Equipment Co., Ltd. will spare no effort to solve practical problems in coal mine sites, improve the accuracy and automation of slurry analysis and detection, optimize production conditions, and warmly welcome customers and friends to visit and guide us for consultation and cooperation.

　　Our persistent pursuit has always been to learn from others' strengths and innovate. Therefore, Shandong Coal Mining Equipment Co., Ltd. will spare no effort to solve practical problems in coal mine sites, improve the accuracy and automation of slurry analysis and detection, optimize production conditions, and warmly welcome customers and friends to visit and guide us for consultation and cooperation.

AfterSalesService :

• Pipeline automatic sampling machine