Medium pressure blower TB type dual-purpose suction and blowing fan for boiler matching, insulation and explosion-proof medium pressure induced draft fan

Description :

Working principle of Toupu medium pressure blower

　　When the fan rotates the impeller, the gas between the impellers is accelerated along the blades and radial direction due to the rotational motion. After entering the outer gas ring, the gas returns to the base of the blades using the pressure difference to form a strong airflow. This process repeats in a spiral direction within the gas ring to achieve the purpose of pressurization. After the gas moves to the exhaust port, due to the pressure being greater than the system pressure, the gas is quickly discharged. The use of high-pressure vortex fans for suction and supply has a wide range of applications.

　　The impeller of a turbo type medium pressure blower (also known as a turbo type centrifugal fan) is covered with an aluminum cast mechanical casing, and the center of the impeller is the air inlet. When the medium pressure fan is working, the power equipment drives the impeller to rotate, drawing air in from the air inlet.

　　During the operation of a medium pressure fan, although the rotation of the impeller increases the pressure and velocity of the gas, the various changes in the gas are relatively small. Therefore, in the design and use of centrifugal fans, gas is usually treated as an incompressible fluid. The gas treatment process of medium pressure fans is completed in the same radial plane, so medium pressure fans are also called radial centrifugal fans.

The function of the turbofan

　　Transparent fans are widely used for dust removal and cooling in factories, mines, tunnels, cooling towers, vehicles, ships, and buildings; Ventilation and induced draft for boilers and industrial furnaces; Cooling and ventilation in air conditioning equipment and household appliances; Drying and selection of grains; Wind tunnel wind source and inflation and propulsion of hovercraft.

Maintenance of Transparent Fan

　　When using a medium pressure fan, pay attention to cleaning the dust on the surface of the fan, checking and cleaning the bearings, and tightening all bolts. Check the air inlet and outlet, adjust the tightness of the V-belt, inspect the lubrication parts, replace the lubricating oil and sealing ring.

AfterSalesService :

• Medium pressure blower for boiler matching