Toughened modified PA6 CM1011G-15 from Toray Japan without floating fibers/high gloss
Category:
Rubber and plastic/engineering plastic/PA6
Model:
Brand:
Toray Industries, Japan
Retail Price
20.00USD
重量
kg
- Product Description
-
Description :
Toughened modified PA6 CM1011G-15 from Dongli, Japan. No floating fiber/high gloss performance description: Dongli AMILAN-CM1011G-15 from JapanReinforced polyamide 6 and glass fiber GF-15% are suitable for injection molding and extrusion molding, characterized by stable high temperature resistance, high rigidity, and balanced various properties. A reinforced nylon resin mainly used in the development of electronic appliances.
PA6 injection molding process
Drying treatment If the material is sealed before processing, there is no need to dry it. However, if the storage container is opened, it is recommended to dry it in hot air at 85 ℃. If the humidity is greater than 0.2%, vacuum drying at 105 ℃ for 12 hours is also required. melting temperature 260~290 ℃. The temperature range for glass additive products is 275-280 ℃. The melting temperature should avoid exceeding 300 ℃. mold temperature Suggest 80 ℃. Mold temperature will affect crystallinity, which in turn will affect the physical properties of the product. For thin-walled plastic parts, if a mold temperature below 40 ℃ is used, the crystallinity of the plastic part will change over time. In order to maintain the geometric stability of the plastic part, annealing treatment is required. pressure Usually between 750 and 1250 bar, depending on the material and product design. Runner and sprue Due to the short solidification time of PA6, the position of the sprue is very important. The gate aperture should not be less than 0.5 * t (where t is the thickness of the plastic part). If using a hot runner, the gate size should be smaller than using a conventional runner, as the hot runner can help prevent premature solidification of the material. If a submerged gate is used, the small diameter of the gate should be 0.75. 
The performance difference between PA6 and PA66 is that their chemical and physical properties are similar, but PA6 has a lower melting point and a wide range of process temperatures, making it more resistant to impact and dissolution. The various performance comparisons are as follows:
Page price description: We sell a variety of raw material models and cannot update prices in a timely manner. If you have any questions in this regard, please feel free to call us for consultation! Our company can provide SGS reports/origin property tables corresponding to the product models. The purchased and sold goods can be one-to-one inclusive of tax, and if the goods are out of stock, the customer will be informed in advance.
Logistics description: Our delivery principle is to save time for customers, with same day delivery in the Pearl River Delta region. For those from other provinces or cities, we will try our best to contact direct logistics companies for small goods or samples. Our choice is express delivery, and we have chosen SF Express.
AfterSalesService :
Key words:- Toughened modified PA6
More Products
