Shenzhen Dongli/High toughness PPS-GF40% A604 low burr/high requirement injection molding rubber particles
Category:
Rubber and plastic/engineering plastic/PPS
Model:
Brand:
Shenzhen Dongli
Retail Price
49.00USD
重量
kg
- Product Description
-
Description :
Shenzhen Dongli/High toughness PPS-GF40% A604 low burr/high requirement injection molding rubber particles:
Product Description: Creep resistance | High fluidity | GF40% enhancement | Low impurities | High toughness
Flame retardant grade: UL94-V0
Color: NC Natural/BK Black
Material representation：>PPS-GF40<
Origin: Dongli Plastics (Shenzhen) Co., Ltd
purpose：Micro electronic component packaging, brushes, brush holders, connectors, connectors, transformer switches, small circuit boards, connectors, high voltage terminals, medium wave filters, sockets, lamp holders, connectors, coil frames, fine-tuning capacitors, boiler sensor brackets, bases, electronic motor brackets, shielding covers, micro bearings, etc
Shenzhen Dongli/High toughness PPS-GF40% A604 low burr/high requirement injection molding rubber particlesPhysical Property Table：
Shenzhen Dongli/High toughness PPS-GF40% A604 low burr/high requirement injection molding rubber particlesFlame retardant polyphenylene sulfideAdvantage:
heat resistance Excellent long-term heat resistance. (UL temperature index 200-240 ℃, UL File No.E41797) dimensional stability Due to its low molding shrinkage rate, low coefficient of linear expansion, and low water absorption, it exhibits excellent dimensional stability in high temperature and high humidity environments. Chemical resistance Has excellent chemical resistance comparable to fluororesin. mechanical properties It has high strength, high rigidity, minimal impact on performance at high temperatures, and excellent fatigue and creep resistance characteristics flame retardancy Without the need to add flame retardants, it can meet the UL94V-0 specification (UL File No. E41797) on its own Electrical Characteristics It exhibits good electrical characteristics in high temperature, high humidity, and high-frequency environments. Formability Excellent fluidity, allowing for horizontal extrusion molding of standard engineering plastics. 
Shenzhen Dongli/High toughness PPS-GF40% A604 low burr/high requirement injection molding rubber particles|High mobilityFlame retardant polyphenylene sulfide | Low overflow injection molding process:
Pre drying temperature Drying material at 120-130 ℃ for 3-4 hours mold temperature 85-140℃ Melt Temperature 300-340℃ Injection pressure 100-150Mpa backpressure 5-12Mpa Injection speed From medium speed to high speed Screw category Standard screw, straight through nozzle Shenzhen Dongli/High toughness PPS-GF40% A604 with low burrs|High intensityFlame retardant typePPS resin has excellent heat resistance and sizeStability and excellent chemical resistance of thermoplastic super engineering plastics, welcome to inquire by phone. Free samples are provided, and customers who confirm physical inspection can provide free test samples!
Shenzhen Dongli/High toughness PPS-GF40% A604 low burr/high requirement injection molding rubber particlesROHS, COA, COC, SGS, UL yellow cards and processing parameters can be provided with the goods. Welcome to call and request! Excellent quality, sufficient supply, affordable prices, we have been working hard and look forward to cooperating with you.
AfterSalesService :
Key words:- High toughness PPS
More Products
