Nanjing Cosmetics Multi effect Distilled Water Machine Injection Water Distilled Water Machine Tube Multi effect Distilled Water Machine

Description :

　　The Nanjing Cosmetics Multi effect Distiller for Injection Water is a device that uses deionized water as raw material water and steam heating to produce injection water. It has the advantages of reasonable structure, simple operation, high thermal efficiency, low energy consumption, and automatic detection of injection water quality. The injection water produced by this machine has stable water quality, high purity, and the effluent water quality meets the regulations of the Chinese Pharmacopoeia, European Pharmacopoeia, and United States Pharmacopoeia for "injection water". This machine is capable of producing high-purity steam for sterilization and disinfection purposes. It is an ideal equipment for water production in hospitals, pharmaceuticals, electronics, food, and beverage industries

　　Working principle of multi effect distilled water machine: Qualified raw water is pressurized by multi-stage pumps and enters the condenser for heat exchange, then sequentially enters each effect preheater, and then enters the first effect evaporator where it is sprayed onto the inner wall of the heating tube through the material water distributor, causing the material water to flow in a film like manner inside the tube and be heated and vaporized by steam from the boiler. The secondary steam carrying water droplets generated enters the steam water separation device from the lower end of the heating tube, and the separated pure steam enters the next effect as heating steam. The raw water that has not been evaporated enters the next effect, and the above process is repeated. The pure steam generated by the final effect enters the condenser and converges with condensed water from all effects except for the first effect for cooling. After removing insoluble gases, it becomes injection water with a temperature of 92-99 ℃.

　　Nanjing Cosmetics Multi effect Distiller Injection Water Distiller Tube Multi effect Distiller Product Structure:

　　This product consists of 5 evaporators, 5 preheaters, 5 vapor-liquid separators, 2 condensers, feed water pumps, filters, control valves, flow meters, frames, pipelines, and controllers.

　　Product Features:

　　Evaporator:

　　By using the column tube falling film evaporation technology, the material water is evenly distributed on the inner walls of each evaporation tube, forming a water film evaporation. The upper effect pure steam provides heat energy for the lower effect evaporator, and completes evaporation and liquefaction to form distilled water.

　　Vapor liquid separator:

　　Adopting the split type steam water four separation technology (steam water centrifugal separation, spin plate partition separation, wire mesh capture water droplet separation, and top spin plate partition separation) to ensure lower heat source and endotoxin content in distilled water. The requirement for pure water is relatively low, and single-stage reverse osmosis (10us/cm) can produce distilled water that meets pharmacopoeia standards.

　　Preheater: adopts U-shaped tube heat exchange, with high heat exchange efficiency, good mechanical performance, and long service life.

　　Condenser: With a unique dual condenser design and a specially designed multi-channel reciprocating structure, the heat exchange is sufficient, and no dedicated cooling water is required to achieve the temperature required for distilled water.

　　Piping: The pipeline design has no water storage, no dead corners, and a low equipment failure rate. The pipeline connection adopts a new sanitary clamp connection, with polished inner and outer mirrors, arranged neatly and beautifully, and operated quickly and conveniently.

　　Configuration: Regulating valve, automatic compensating valve, throttle valve, conductivity meter, temperature meter selected from domestic and foreign high-tech products, with beautiful appearance and complete functions.

　　Nanjing Cosmetics Multi effect Distilled Water Machine Injection Water Distilled Water Machine Tube Multi effect Distilled Water Machine Water Source

　　The water source required for the Nanjing cosmetics multi effect distilled water machine, injection water distilled water machine, and tube multi effect distilled water machine must be pure water produced by reverse osmosis water

　　Advantages of Guanyu Multi effect Distilled Water Machine:

　　Save steam: Save steam, effectively utilize coal resources, and achieve a savings rate of over 20%.

　　Water saving: No need for additional cooling water, saving you valuable purified water resources.

　　High effluent quality: The conductivity of distilled water is below 0.6us/cm (national standard ≤ 2us/cm), and the bacterial endotoxin is below 0.125Eu/m (national standard ≤ 0.25Eu/m)

　　Fast water output: Qualified water can be produced within 5 minutes of startup.

　　Automatic control of distilled water quality:

　　The intelligent instrument continuously displays the current conductivity of distilled water outlet and can set the qualified electrical rate value.

　　Unqualified distilled water automatically switches to discharge. And it can produce fully automatic unmanned distillation machines according to user needs (automatic alarm, startup, shutdown, pressure reduction, protection, startup for shortage, full water, low pressure, medium pressure, high pressure).

AfterSalesService :

• Multi effect distilled water machine for cosmetics in Nanjing