HaiTe Filter Hydraulic Accessories YWZ YKJD Liquid Level Controller Signal Control Device

Description :

　　HaiTe Filter Hydraulic Accessories YWZ YKJD【level controller】Message control device

　　level controllerProduct Introduction:

　　level controllerIt is an essential accessory on oil tanks, hydraulic oil tanks, cooling tanks, and gear rotation boxes, which can indicate the level and temperature of the liquid. The YWZ series liquid level and temperature gauge is made of high-strength engineering plastics and aluminum alloy materials according to the GB1161 standard. It has excellent assembly performance, strong, crack resistant, shock resistant, and high strength. The design is novel, beautiful, and the liquid level and temperature display is clear, full of three-dimensional sense. Widely used in various hydraulic systems.

　　Select specifications based on the fuel tank level, ordering instructions:

　　If a liquid level gauge without a thermometer is required with a center distance of 250mm between screw holes, the model is YWZ-250; If a thermometer is required, the model is YWZ-250T.

　　Note: The surface of this product should not come into contact with banana water.

　　level controllerInstallation method and accessories:

　　According to the center to center distance (E) size of the selected specifications, process two mounting holes. For example, when the wall thickness of the fuel tank is ≤ 10mm, the optical holes for the two mounting screws are F11mm; If the wall thickness of the fuel tank is greater than 10mm, the threaded holes for the two mounting screws are M10. The planes of the above two types of holes should be treated to prevent oil leakage after installation. Liquid level gauge accessories: two nuts, two washers, and two sealing flat washers, all provided by our factory.

　　The YWZ series can be used in conjunction with the YD type level gauge, allowing for easy disassembly of the level gauge without the need to drain the oil tank.

　　Temperature: -20~+100 ℃ and expressed in Celsius and Fahrenheit

　　Pressure: 0.1~0.15Mpa

　　Ordering selection: If there is an original model, please order according to the model. If there is no model, please provide the seller with accurate installation dimensions, distance between screws, and the required medium and material for the oil.

　　The models are as follows:

　　YWZ-150T、YWZ-160、YWZ-160T、YWZ-200、YWZ-200T、YWZ-250、YWZ-250T、YWZ-254、YWZ-350、YWZ-350T、YWZ-400、YWZ-400T、YWZ-450、YWZ-450T、YWZ-500、YWZ-500T。

AfterSalesService :

• controller