Haite filter magnetic oil suction filter ZL12-122 self sealing magnetic oil suction filter, quality assured

Description :

ZL12-122 Self sealing Magnetic Oil Absorption Filter Product Introduction:

ZL12-122 self sealing magnetic oil suction filter has a manual self sealing valve. When replacing the filter element, the self sealing valve should be closed to prevent the oil in the tank from flowing out. When installing, the filter should be immersed below the oil level. If the self sealing valve is not fully opened, do not start the pump, otherwise it will cause the pump to empty. The filter is equipped with a filter element pollution blockage transmitter. When the filter element is blocked by pollutants and the vacuum degree at the oil outlet is 0.018MPa, the transmitter will send a signal. The filter element should be replaced or cleaned in a timely manner to avoid pump suction and other faults.

ZL12-122 Self sealing Magnetic Oil Absorption FilterTechnical Specifications:

Brand: HaiTe Filter

Model: ZL12-122/80

Nominal flow rate: 120-160L/min

Filtering accuracy: 10-80 μ m

Diameter: 25-32mm

Pressure loss: ≤ 0.01mpa

Connection method: threaded type

Matching filter element model:ZL12X-122/*

Model recommendation: ZL12-122/* ZL12B-122/* ZL12C-122/*

ZL12-122 Self sealing Magnetic Oil Absorption FilterProduct Features:

a) Equipped with a visual sensor: As the filter element gradually becomes clogged with oil, the red signal ring inside the observation window of the visual sensor rises slowly. When the red signal ring rises to a high position (completely red inside the observation window), it indicates that the filter element has been clogged with oil to the point where it needs to be cleaned or replaced. After cleaning or replacing the filter element, press the reset button to make the red signal ring slide down;

b) Electric transmitter: When the filter element is blocked by pollutants and the vacuum degree at the oil outlet is -0.018Mpa, the micro switch inside the transmitter will actuate, sending a switch signal indicating that the filter element should be cleaned or replaced. If it cannot be stopped immediately or no one comes to replace the filter element, the bypass valve located inside the filter cover will automatically open, with a pressure of -0.02Mpa for vacuum degree.

c) Equipped with a bypass valve: When the filter element is blocked by oil and the vacuum degree at the oil outlet is -0.02Mpa, the bypass valve will automatically open to avoid faults such as suction in the oil pump

ZL12-122 Self sealing Magnetic Oil Absorption FilterApplication fields:

1. Metallurgy: Used for filtering hydraulic systems of rolling mills and continuous casting machines, as well as filtering various lubrication equipment.

2. Petrochemicals: Separation and recovery of products and intermediate products in refining and chemical production processes, purification of liquids, purification of magnetic tapes, optical discs, and photographic films in manufacturing, and filtration of oil field well water and natural gas for particle removal.

3. Textile: Purification and uniform filtration of polyester melt during wire drawing process, protective filtration of air compressor, and removal of oil and water from compressed gas.

4. Electronics and pharmaceuticals: pre-treatment and filtration of reverse osmosis water and deionized water, pre-treatment and filtration of cleaning solution.

5. Thermal power and nuclear power: Purification of oil for lubrication systems, speed control systems, bypass control systems of gas turbines and boilers, purification of feed pumps, fans, and dust removal systems.

6. Mechanical processing equipment: lubrication systems and compressed air purification for paper making machinery, mining machinery, injection molding machines, and large precision machinery, dust recovery and filtration for tobacco processing equipment and spraying equipment.

AfterSalesService :

• Magnetic oil suction filter