Pulse filter cartridge dust collector, Xining Thermal Power Plant filter cartridge dust collector, shipped nationwide

Description :

　　The structure of an integrated filter cartridge dust collector consists of an inlet duct, an exhaust duct, a box, an ash hopper, a cleaning device, a guide device, an airflow distribution plate, a filter cartridge, and an electrical control device, similar to the structure of an air box pulse bag dust collector. The arrangement of the filter cartridge in the dust collector is very important. It can be vertically arranged on the box flower board or tilted on the flower board. From the perspective of dust cleaning effect, vertical arrangement is more reasonable. The lower part of the flower board is the filtering chamber, and the upper part is the pulse chamber of the air box. An airflow distribution plate is installed at the dust collector.

　　Integrated filter cartridge dust collector device:

　　1. Dust cleaning device: The series of dust collectors use compressed air to achieve pulse dust cleaning through PLC control;

　　2. Settling chamber: After entering the series of dust collectors, the gas flow rate of dust is greatly reduced, and large particles of dust naturally settle through their own gravity;

　　3. Filter cartridge filter layer: Select a filter cartridge of the appropriate material based on the gas characteristics of the dust. When the dust containing gas enters the dust collector and passes through the filter material, the dust is intercepted on the outer wall of the filter cartridge. Clean air enters the interior of the filter cartridge and is discharged from the exhaust port;

　　4. Differential pressure gauge: The pulse time is controlled by the differential pressure gauge to promptly remove accumulated dust;

　　5. Dust collection hopper: After the series dust collector pulses, the dust enters the dust collection hopper and can be cleaned regularly.

　　Working principle of integrated filter cartridge dust collector:

　　The dusty gas enters the filtering chamber through the ash hopper (or lower open flange), and the coarser particles directly fall into the ash hopper or ash bin. The dusty gas is filtered by the filter bag, and the dust is trapped on the bag surface. The clean gas passes through the bag mouth to the clean air chamber and is discharged into the atmosphere by the induced draft fan. When the dust on the surface of the filter bag continues to increase, causing the equipment resistance to rise to the set value, the time relay (or micro differential pressure controller) outputs a signal, and the programmable controller starts to work. The pulse valves are opened one by one, allowing compressed air to blow and clean the filter bag through the nozzle, causing the dust removal filter bag to suddenly expand. Under the action of reverse airflow, the dust attached to the bag surface quickly separates from the filter bag and falls into the ash hopper (or ash bin), and the dust is discharged through the flap valve. Spray blowing only cleans the filter bags one by one, while other filter bags continue to filter normally without stopping the fan.

　　Technical parameters of integrated filter cartridge dust collector:

　　1. Excellent filtering materials ensure a dust removal efficiency of up to 99.99% for 1 μ m;

　　2. Can serve as a collector for ultrafine dust and is also suitable for dust removal systems in various working conditions;

　　3. Solved the filtration problem of ultrafine, coalescing, humid, and fibrous dust;

　　4. Simple structure, small external volume, space saving, easy maintenance, and long service life;

　　5. The modular combination structure allows for a wide and flexible selection of filtration area, processing air volume, and external dimensions, making it highly practical.

　　Application areas of integrated filter cartridge dust collector:

　　1. Widely used for dust removal and purification of non fibrous industrial dust and material recovery in various industrial and mining enterprises such as metallurgy, building materials, machinery, chemical industry, and mining;

　　2. Modular combination filter cartridge dust collector is an energy-saving dust purification equipment. Widely used for dust purification in industries such as mechanical manufacturing, sanding, chemical coatings, construction, materials, production, electronics, and wood processing.

　　The business philosophy of Xinxiang Haite Filter Co., Ltd. is "quality-oriented, integrity-based, and win-win". We take product quality as the foundation and integrity management as the development path. We are willing to cooperate sincerely with our customers, share benefits, and develop and prosper together!

AfterSalesService :

• Pulse filter cartridge dust collector