Haite filter GLC4 series cooler tube cooler GL series tube cooler manufacturer

Description :

Product introduction of tubular cooler:

The tubular cooler consists of two oil coolers with the same area and a three-way valve device, one working and the other standby. Each cooler can bear the cooling load of the entire system. One end of the tube plate is fixed, and the other end is a floating, detachable tube bundle and water chamber cover, which is easy to clean, inspect and maintain during operation. The material of the cooler can be selected from various options based on the usage location and water system conditions.

Product features of tubular cooler:

Tubular coolerDeveloped based on advanced technologies and processes both domestically and internationally. The material of the heat exchange tube is low ribbed finned copper tube, and advanced manufacturing processes such as transverse baffles, longitudinal turbulent flow plates, structural plates, and mechanical expansion tubes are used. Therefore, it has the characteristics of novel structure, small volume, light weight, and excellent heat transfer effect.Tubular coolerIt is a new and efficient cooler mainly used in low viscosity hydraulic and lubrication systems to cool the working oil to the specified temperature. Therefore, it is widely used for cooling various hydraulic equipment in industries such as chemical, power, metallurgy, mining, and light industry, and is an ideal cooling device. Each cooling series has many specifications and forms, which have been used for various user requirements. In addition to the basic products introduced by the company, various large and special coolers can also be manufactured according to user requirements.

coolerInstallation method:

The installation methods of coolers are divided into vertical oil coolers and horizontal oil coolers. Vertical coolers have the characteristics of small installation area and easy installation. Horizontal oil coolers have the characteristics of low pressure drop and strong resistance to water impact. Therefore, vertical or horizontal oil coolers should be selected correctly according to different site, space height, and performance requirements to meet the needs of generator sets and other equipment.

(1) After passing the pressure test of the cooler, it can be put into use, and the front row should store all the water inside.

(2) Check whether each pouring and venting valve is flexible and functional, and whether the switch position is correct. Also, ensure that all pressure gauges and thermometers are installed properly.

(3) Check whether the foundation and support are firm, and whether all bolts are fully fastened and tightened.

(4) When put into use, first add cold flow, then add hot flow.

(5) When using cold or hot media, ensure that the secondary line is unobstructed, then slowly open the inlet valve. After checking that there are no problems, open the inlet valve slowly to prevent pressure build-up. During the commissioning process, attention should be paid to observing changes in the equipment. After the cooler is put into use, leakage may occur with changes in temperature and pressure, and it should be checked in a timely manner.

AfterSalesService :

• GLC4 series cooler