HaiTe filter, high flow filter, industrial water treatment, high flow filter cartridge, filter manufacturer

Description :

Industrial water treatment high flow filter cartridge product introduction:

The high flow filter element is produced by folding and welding a 6 "large diameter structure, using internal pressure, with a large filtration area, high pollutant holding capacity, and high flux. Widely used in various industries for security filtration, circulating water filtration, and liquid impurity removal filtration. The cylinder is refined from 304 or 316 stainless steel and can be installed with different specifications and models of filter cartridges, such as PP filter cartridges, wire wound filter cartridges, activated carbon filter cartridges, etc. Due to its large filtration area, fast speed, non clogging, and convenient use, it is widely used in pre-treatment and terminal filtration in various industries. Security filters come in quick opening, flange type, and clamp type. The diameter ranges from 89-1200, the number of filter elements varies from 1-150, and the filtration accuracy is 5-100 microns. Generally set before the pressure vessel to remove fine particles with turbidity above 1 degree, in order to meet the requirements of subsequent processes for incoming water; Sometimes it is also set at the end of the entire water treatment system to prevent small particles (such as broken resin) from entering the finished water

Working principle of industrial water treatment high flow filter element filter:

The security filter uses molded filter material, which allows the original liquid to pass through the filter material under pressure, leaving the filter residue on the pipe wall, and allowing the filtrate to flow out through the filter material, thus achieving the purpose of filtration. Structure: filter cloth, filter screen, filter disc, sintered filter tube, wire wound filter element, melt blown filter element, etc. Due to different filter materials, the filter aperture also varies. Precision filtration is a type of filtration that falls between sand filtration (coarse filtration) and ultrafiltration, with a filtration pore size generally ranging from 0.5 to 120 μ m. The same form of filter material can be divided into different specifications according to its external dimensions. There are two types of wire wound filter cartridges (also known as honeycomb filter cartridges): one is polypropylene fiber - polypropylene skeleton filter cartridge, with a higher operating temperature of 60 ℃; Another type is degreased cotton fiber - stainless steel skeleton filter element, with a higher operating temperature of 120 ℃. Melt blown filter cartridge is made of polypropylene as raw material and formed by melt blown process, with a high working temperature of 60 ℃. Precision filtration can remove suspended solids, certain colloidal substances, and small particles from water

Industrial water treatment high flow filter cartridge Product parameters:

Brand: Haite

Traffic: 5-100T

Wall thickness: 5mm

Shell material: stainless steel

Work pressure: 1.0Mpa

Opening method: flange+boom

Shell material: 304 stainless steel

Note: Flange specifications can be customized according to user requirements.

Packaging: Wooden crate packaging

Application scope of industrial water treatment high flow filter cartridge filter:

Industrial water treatment high flow filter element filter for power, petrochemical, chemical, food and beverage, metallurgy, papermaking, environmental protection treatment, etc

AfterSalesService :

• filter