Haite filter cartridge melt blown filter cartridge PP melt blown filter cartridge manufacturer
Category:
Environmental Protection/Filter material/Filter element
Model:
pp
Brand:
Haide filter
model:
pp
structural type:
Spray soluble filter element
Filter layer material:
PP/polypropylene
Skeleton material:
polypropylene
feature:
acid and alkali resistant
Operating Temperature:
eighty
Maximum working pressure difference:
3.4bar
filtration accuracy:
1-100um
Place of Origin:
Xinxiang
purpose:
solid-liquid separation
Applicable subjects:
water
Specifications:
10-40 inches
manufacturer:
Haide filter
Retail Price
10.00USD
重量
kg
- Product Description
-
model pp
structural type Spray soluble filter element
Filter layer material PP/polypropylene
Skeleton material polypropylene
feature acid and alkali resistant
Operating Temperature eighty
Maximum working pressure difference 3.4bar
filtration accuracy 1-100um
Place of Origin Xinxiang
purpose solid-liquid separation
Applicable subjects water
Specifications 10-40 inches
manufacturer Haide filter
Description :
Product introduction of PP melt blown filter cartridge:
PP filter cartridge (also known as melt blown filter cartridge) is a type of filter material made from non-toxic and odorless polypropylene as raw material, which is heated, melted, sprayed, pulled, and received into shape. Melt blown filter element is a new type of precision filter element, which has the characteristics of small volume, large filtration area, high precision, no pollution, easy installation and replacement. Due to the use of microporous membrane filtration, it has small adsorption, no retention of filtrate, and wide chemical compatibility, with a wide range of applicability.
Product features of PP melt blown filter cartridge:
(1) The filter element has a dense and uniform pore size, with high filtration efficiency. Due to the bridging phenomenon of particles in the filter pores, particles smaller than the pores can also be blocked, resulting in high filtration efficiency.
(2) High self cleanliness and no pollution to water quality.
(3) Corrosion caused by chemical reagents such as acid and alkali, as well as organic solvents.
(4) High strength, the filter element does not deform when the pressure difference between the inlet and outlet of the filter is 0.4mpa.
Product parameters of PP melt blown filter cartridge:
Length 5 ″ 10 ″ 20 ″ 30 ″ 40 ″ 50 ″ 60 ″
Outer diameter (± 1mm) 60-115 mm
Inner diameter (± 1mm) 28,30mm
skeleton
① PP skeleton
② 304 skeleton
1. Electronics and power industry: pure water, gas, electrolyte, printing line plate, etc.
2. Chemical and petrochemical industries: solvents, coatings, magnetic pastes, detergents, liquid wax, etc.
3. Pharmaceutical industry: hospital water, pharmaceutical injections, oral fluids, etc.
4. Food industry: food, beverages, drinking water, alcoholic beverages, etc.
AfterSalesService :
Key words:- filter element
More Products
