Fully automatic self-cleaning filter, vertical self-cleaning filter, brush self-cleaning filter manufacturer

Description :

　　Product Introduction of Fully Automatic Self Cleaning Filter:

　　The fully automatic self-cleaning filter is an indispensable treatment method in the water purification process, used to intercept various impurities in water, purify water quality or protect the normal operation of other equipment in the system. Ordinary mesh filters are widely used in water source filtration, industrial circulating water systems, and other fields due to their simple structure, good filtration effect, and low resistance. However, their disadvantages are small pollutant holding capacity, susceptibility to blockage by pollutants, and complex cleaning work. The equipment must be disassembled to achieve cleaning of the filtering part, and the status of the filter cannot be monitored. Moreover, they are greatly affected by human factors, resulting in a low degree of automation of the entire system. The fully automatic self-cleaning filter can filter raw water and automatically clean and discharge the filter element, and the system provides uninterrupted water supply during cleaning and discharge. Compared with previous filters, this device has the advantages of high automation, large processing capacity, self-cleaning and sewage discharge, uninterrupted water supply, and wide application range.

　　Technical parameters of fully automatic self-cleaning filter:

　　Single processing capacity: 45-2350m3/h

　　Work pressure: 0.1-2.5Mpa

　　Working water temperature: 95 ° C

　　Filtering accuracy range: ≥ 50 μ m

　　Water required for self-cleaning:<1%

　　Self cleaning time: 10-60 seconds

　　Self cleaning control mode: pressure difference, time, and manual

　　Electric control mode: AC three-phase 380V/50Hz

　　Control interface: digital display, knob, switch

　　Filter type: 316L woven mesh, wedge-shaped mesh

　　Product features of fully automatic self-cleaning filter:

　　1) The default filtration accuracy is 100 microns, and can be selected from 100 to 3000 microns. It has a large filtration area and high pollutant holding capacity, and users can customize it according to actual working conditions.

　　2) The cleaning method is simple, and the cleaning cycle is electronically monitored, which can achieve automatic cleaning and sewage discharge.. All parameters in the fully automatic self-cleaning filter control system can be adjusted.

　　3) Equipped with motor overload protection, it can effectively protect the motor.

　　4) It has the characteristics of uninterrupted water supply and no need for bypass during cleaning and sewage discharge, with short cleaning time and low sewage consumption, not exceeding 1% of the total flow rate.

　　5) Modular structure, strong maintainability, easy to install and disassemble.

　　6) The connection method with the user pipeline is flange connection, and the flange adopts national standard flange, which has strong universality.

　　Application areas of fully automatic self-cleaning filters:

　　Fully automatic self-cleaning filters are widely used in circulating or non circulating cooling water systems, heat exchange systems, central air conditioning systems, central heating systems, hot water boiler systems, etc., to protect cooling equipment, heat exchange devices, air conditioners, boilers, etc. This device is suitable for a wide range of industries, including construction, chemical, power, metallurgy, rubber, paper, textile, coal, food and other industries.

AfterSalesService :

• Fully automatic self-cleaning filter