Pneumatic sleeve regulating valve ZJHM-64C DN125 precision small film sleeve pneumatic regulating valve

Description :

　　1. Product Overview

　　Pneumatic control valve is a right angle rotary structure that can be used in conjunction with valves to achieve proportional adjustment; The V-shaped valve core is suitable for various regulating occasions, with a large rated flow coefficient, adjustable ratio, good sealing effect, sensitive regulating performance, small volume, and can be installed vertically and horizontally. Suitable for controlling media such as gases, vapors, liquids, etc.

　　Pneumatic control valve is a right angle rotary structure composed of a V-shaped valve body, pneumatic actuator, and other accessories; There is an inherent flow characteristic that is approximately equal in percentage; Adopting a dual bearing structure, the starting torque is small, and it has good sensitivity and induction speed; Superb cutting ability.

　　The pneumatic piston actuator uses compressed air as the power source, which drives the crank arm to rotate 90 degrees through the movement of the piston, achieving automatic opening and closing of the valve. Its components include: adjusting bolts, actuator housing, crank arm, cylinder block, cylinder shaft, piston, connecting rod, and universal joint.

　　Pneumatic control valve consists of an actuator and a regulating mechanism. The actuator is the thrust component of the regulating valve, which generates corresponding thrust according to the magnitude of the control signal pressure, and drives the action of the regulating mechanism. The valve body is the regulating component of a pneumatic control valve, which directly contacts the regulating medium and regulates the flow rate of the fluid.

　　2. Standard technical parameters

　　3. Physical pictures

　　4. Company actual shooting

AfterSalesService :

• Pneumatic sleeve regulating valve