Manufacturer of fence protection net for Xinjiang airport

Description :

　　From the perspective of processing technology, the fence and protective net of Xinjiang airport can be divided into airport woven protective isolation fence, airport welded protective isolation fence, and airport steel plate mesh fence. The airport flight area boundary adopts physical boundary barriers (such as single/double layered metal fences or brick walls with additional barbed wire rolling cages, etc.). Here, we will explain in detail the boundary barrier network of the flight area. The airport physical boundary wall requires a net height of not less than 2.5m on the inner and outer sides of the physical boundary, and a ground clearance of not more than 3cm. The top anti climbing facilities use fences (walls) with barbed wire rolling cages or blade barbed wire structures.

　　Airport Airfield Boundary Network

　　1. The diameter of the steel bar is 5mm;

　　2. The center distance between adjacent horizontal bars shall not exceed 100 mm, and the center distance between left and right bars shall not exceed 50 mm;

　　3. The center to center distance between the two supporting columns should not exceed 3 meters, and the supporting columns should be firm;

　　4. The frame shall be made of angle steel not less than 5mm and firmly connected to the support column; There are reinforcing ribs or other reinforcement measures between the upper and lower borders;

　　5. The lower ground shall be paved with bricks, stones or cement concrete beams, which shall be firmly connected to the supporting columns, with a cross-sectional size of not less than 240 mm × 300 mm;

　　6. The distance between the lower end of the vertical reinforcement and the ground beam or ground shall not exceed 30 mm, and an anti climbing structure shall be built on the upper part of the fence;

　　7. An airport fence equipped with a Class II instrument landing system, with a dense mesh installed at a height of 1 meter above the ground;

　　8. Adopt anti drilling protection measures for fence sections constructed in water or across drainage ditches;

　　9. Rust removal and anti-corrosion treatment shall be carried out on the metal parts, and the anti-corrosion period shall not be less than 8 years

　　The airport enclosure we produce needs to have safer, more reliable, and flexible management. Effective measures should be taken to prevent a series of unsafe accidents, such as intentional strikes, collisions, climbing and overturning, cutting and damaging the physical boundaries of the airport, entering the apron or infiltrating the cabin, which pose a great threat to airport air defense safety. Therefore, we need to improve the safety and anti climbing measures of the airport's airspace boundaries.

AfterSalesService :

• Manufacturer of fence protection net for Xinjiang airport