Digital DC ammeter Ankrui

Description :

　　Impact resistance test level IV (IEC 61000-4-5)

　　RF Conducted Interference Test (IEC 61000-4-6) Level III

　　Electromagnetic radiation anti-interference test (IEC 61000-4-8) Level III

　　Function.

　　The signal can be directly connected from current and voltage transformers;

　　The transformation ratio of PT/CT can be set arbitrarily;

　　The dashboard can be set to scroll;

　　Module design for switch I/O quantity, relay alarm output, 4-20mA analog quantity, etc;

　　Different addresses can be set according to the different instruments;

　　Communication access capability of SCA DA and PLC systems; Communication capability with various software in the industry (Intouch, Fix, Citec, Configuration Network, etc.);

　　LED or blue screen backlit LCD display, high visibility;

　　Easy to install, simple to connect, and low engineering workload;

　　The instrument adopts a specialized current loss protection circuit, which will not lose data in case of current loss. After power supply is restored, the instrument will continue to operate

　　Make;

　　Four quadrant energy metering, time-based billing, electricity consumption recording, and 12-month electricity consumption statistics.

　　PZ series DC detection instrument

1 Product Introduction

　　Function:

　　This series of instruments can measure voltage, current, power, forward and reverse electrical energy in DC systems. It can be equipped with RS485 communication interface, analog data conversion, switch input/output and other functions, which can be used for local display and connected to industrial control equipment and computers to form a measurement and control system.

　　Application scope:

　　Suitable for power parameter detection of DC systems such as DC screens, solar power generation, and telecommunications base stations.

　　Ordering Example:

　　Specific model: PZ72-DE/C

　　Technical requirements: Input voltage DC 0-1000V; Input range: 0~2500A (external splitter or Hall element, programmable range); Accuracy level 0.5.

　　Communication protocol: RS485 interface Modbus/RTU protocol; DL/T645-2007 protocol

　　Power supply: 85-265VAC/DC, 20-60VDC

2 Technical parameters

3 Product Selection

4 External dimensions

　　The power consumption is less than 1W. The effective AC value of the working frequency pressure resistance is 2kV/1min. A dry-type power supply with 4 or 8 input ports and built-in+5V power supply. Switch output quantity. Output type: 2 or 4 electrical appliances with normally open contacts for output. Exposure levels: AC 250 V/3A, DC 30 V/3A. Impulse output type: optocoupler pulse with open collector, 2-channel output. Pulse constant: 10000, 40000, 16000 0 imp/kWh. signal communication. RS485 interface Modbook RTU protocol. The baud rates can be set to 38 400, 19 200, 9600, and 4800. Appearance and installation dimensions (mm): The frame size is 80 mm * 80 mm, the ACR 100 E opening size is 76 mm * 76 mm, and the installation depth is 91mm. Embedded installation mode, external compression mode. LE D display rights and copyrights. ACR 120 E: Network Electrical Instrument (III) - No. 2004 3003 54 61 X. Copyright registration number: Shanghai DG Y-2007-1338 Example of Ankerui ACR XXE Comprehensive Measurement and Control Software V1.0. Model: ACR 120 E. Backup power supply: AC/DC 220V. Input device: 380V 600 A/5A2 DI/2D O. Power grid: three-phase four wire. Communication: RS485/Modbus RTU.

AfterSalesService :

• Digital DC ammeter