Three phase motor phase loss protector
Category:
Electrical Engineering/Complete electrical and electrical equipment/Other electrical and electrical equipment
Model:
ARD2F-100
Brand:
Acrel
Retail Price
1,000.00USD
重量
kg
- Product Description
-
Description :
ARD series low-voltage motor protector
1 Product Introduction
Function:
This series of low-voltage motor protectors has protection functions such as overload, phase failure, imbalance, underload, grounding/leakage, and locked rotor. It can form a motor control and protection unit with electrical components such as contactors and motor starters, and has functions such as remote automatic control, on-site direct control, panel indication, signal alarm, and fieldbus communication.
Application scope:
It can be widely applied in the field of power distribution in industries such as coal mining, petrochemicals, smelting, electricity, and construction.
Ordering Example:
Specific model: ARD3T K1 A25/C+60L
Technical requirements: Electric motor power 5.5KW; DI is a passive node, controlling DO working voltage to 220V; LCD display.
Communication protocol: Dual RS485 interface Modbus/RTU protocol
Power supply: AC/DC220V
2 Technical parameters
Digital motor protector
Technical parameters and indicators
ARD2(L)ARD2FARD3
Power supply voltage AC85V~265V/DC100V~350V
Power consumption ≤ 7VA ≤ 15VA
Rated working voltage AC380V/AC660V, 50Hz/60Hz
Rated working current 1A (0.1~9999)
5A（0.1～9999）
1.6A（0.4A～1.6A）
6.3A（1.6A～6.3A）
25A（6.3A～25A）
100A（25A～100A）
250A（63A～250A）
800A（250A～800A）
Relay output contact capacity AC250V/3A; DC30V/ 3AAC250V/ 6A
Switch input 2 channels and 9 channels
Environmental working temperature: -10oC~55oC
Storage temperature: -20oC~65oC
Relative humidity: 5% to 95% without condensation
Altitude: ≤ 2000m
Pollution level 2
Protection level IP20, main body IP20, display unit IP45
Installation Category III
Modular motor protector
Technical parameters and indicators
ARD3T power supply AC/DC 110/220V or AC 380V, power consumption ≤ 15VA
The rated working voltage of the motor is AC 380V/660V, 50Hz/60Hz
The rated working current of the motor is 1.6 (0.40A-2.00A), measured using a measuring module
6.3（1.6A-6.3A）
25（6.3A-25A）
100（25A-100A）
250 (63A-250A) adopts external current transformer+measurement module
800（250A-800A）
Leakage 50mA-1A using measurement module+leakage current transformer
3A-30A
Relay output contact capacity resistive load AC250V, 6A; DC24V、6A
Inductive load AC250V, 2A; DC24V、2A
Main switch input and output 4DI, 4DO, DI can be a dry node or a wet node
Switching modules 4DI, 3DO, DI can be dry or wet nodes
Temperature module external sensor types: PT100, PT1000, Cu50, PTC, NTC
Number of sensor channels: 3 channels
Sensor corresponding measurement range:
PT100/PT1000：-50°C～+500°C
Cu50：-50°C～+150°C
PTC/NTC：100Ω～30kΩ
The analog module can achieve: 2-channel 4-20mA input measurement, 2-channel 4-20mA transmission output
4-20mA input measurement accuracy ± 0.5%
4-20mA output with load capacity ≤ 500 Ω
Main communication RS485: Modbus RTU
Communication module RS485: dual Modbus RTU, Profibus
Environmental working temperature -10oC~55oC
Storage temperature -25oC~65oC
Relative humidity ≤ 95%, no condensation, no corrosive gas
Altitude ≤ 2000m
Pollution level 3
Protection level: main body IP20, split display module IP45 (installed on the cabinet)
Installation Category III
3 Product Selection
4 Technical parameters
ARD2 (L) motor protector
◆ Main module
◆ Transformer
0.1A~100A transformer
63A~250A transformer
250A~800A transformer
Leakage current transformer below 100A
Leakage current transformer above 100A
ARD2F and ARD3 motor protectors
◆ Main module
◆ Display unit
◆ Anti vibration module
◆ AC380V power module
ARD3T motor protector
◆ Main module
Measurement module
Current measurement module
Current+voltage measurement module
Temperature, analog, and switch modules
◆ Communication module
◆ Display module
◆ External current transformer
Leakage current transformer
AfterSalesService :
Key words:- Motor phase loss protector
