SHV volumetric heat exchanger manufacturer for customized processing of heat exchangers

Description :

　　Contact customer service for specific price and model

　　Introduction

　　A volumetric heat exchanger is mainly composed of a body, steam coil components, steam inlet and outlet, cold and hot water inlet and outlet, etc. In order to prevent surface corrosion inside the body of the heat exchanger, a layer of anti-corrosion alloy is sprayed on the surface, and a paint layer is brushed on the alloy layer. In addition, the original pipe box is removed, and the steam coil is directly connected to the outside through a flange, so that the present utility model has the characteristics of simple and reasonable structure, long service life, good heat transfer effect, energy saving, etc.

　　Characteristics of volumetric heat exchanger

　　1. The temperature drop of the heat medium in the volumetric heat exchanger is large. During steam water heat exchange, the outlet temperature of condensed water is about 50 ℃, and a drain valve needs to be installed above and below the return pipe to facilitate use and maintenance. During water water heat exchange, the temperature drop is 2-2.5 times that of the same type of heat exchanger, and after heat exchange with high-temperature hot water at 120-150 ℃, it can be reduced to 70-75 ℃.

　　2. The volumetric heat exchanger has good heat transfer effect, good heat dissipation effect, small heat loss, and energy saving. At the same time, when steam is used as the heat medium, about 15% of the total heat exchange can be recovered as condensed water heat.

　　3. The cold water area is small and the volume utilization rate is high.

　　4. Maintaining the advantages of large water storage capacity, low head loss, safe and stable water supply, and convenient cleaning of scale in volumetric heat exchangers.

AfterSalesService :

• Customized heat exchanger processing