Manufacturer direct sales of floating coil heat exchanger prices

Description :

　　Contact customer service for specific price and model

　　Overview

　　The floating coil radiator adopts the form of a cantilever floating coil. During the process of heating hot water with steam, the up and down floating of the coil disrupts laminar heat transfer due to the water flow around the coil. Greatly improved heat transfer capacity, with a heat transfer coefficient K ≥ 3000W/㎡℃. At the same time, due to the scouring effect of water flow, the tube can freely float and expand/contract, making it less prone to scale formation. If a small amount of scale accumulates during long-term use, it will automatically remove the scale through the expansion of the tube. Therefore, the heat transfer capacity will not decrease after long-term use, and the effect is good.

　　Scope of application

　　Floating coil radiators can be widely used as heat exchange equipment in boiler rooms, heat exchange station rooms, and air conditioning unit rooms of heating, air conditioning, and hot water supply systems in industrial and civil buildings such as chemical, refining, shipbuilding factories, as well as high-end hotels, restaurants, office buildings, school research buildings, and Yiyuan outpatient wards

　　structural characteristics

　　1. The shell of the heat exchanger comes in two types: ordinary steel plate and stainless steel plate, and the heat transfer tube bundle is made of copper tube.

　　2. The design pressure of the tube side of the heat exchanger is 0.1-0.9MPa for steam type and ≤ 1.6MPa for water water type; The shell is equipped with three specifications: 0.6MPa, 1.0MPa, and 1.6MPa. When selecting equipment, attention should be paid to matching the heat source with the equipment performance.

　　3. Due to the high heat transfer efficiency of this heat exchanger, a temperature regulator (i.e. temperature controller) must be installed on the steam inlet pipeline of the heat exchanger to control the steam flow rate and hot water outlet temperature.

　　4. The transportation and installation of heat exchangers must be carried out using lifting equipment such as cranes to prevent rolling. The heat exchanger should be firmly fixed to the foundation to prevent vibration during operation, and maintenance positions should be left around the heat exchanger.

　　Characteristics of Floating Coil Heat Exchanger

　　(1) Adopting a new type of floating disk tube bundle structure improves heat transfer capacity and significantly enhances automatic scaling ability;

　　(2) Tube bundles can be connected using flexible joints, reducing welding points and making maintenance more convenient;

　　(3) Compact structure, small volume, and small footprint.

AfterSalesService :

• Manufacturer direct sales heat exchanger