High voltage signal generator-110KV high voltage power frequency signal generator-Electronic signal generator manufacturer

Description :

　　Instructions for using the KLD-110KV high-voltage power frequency signal generator from KELIDA: Select a voltage level verification signal generator that is the same as the voltage tester. The working part of the handheld voltage tester (voltage tester head) contacts the electrode head of the generator with the electrode head of the tested electrical appliance, and presses the "working" switch. At this time, the voltage tester emits sound and light signals indicating that its performance is intact. If there is no sound light indication, it indicates that the voltage tester has a fault and should be repaired or replaced before use. When detecting the proximity alarm safety helmet, simply place the electrode head of the high-voltage signal generator close to the alarm and press the "work" switch.

　　Notes on the KLD-110kv Signal Generator of Kolida:

　　1. The signal generator is equipped with a "power indicator", but the indicator light does not light up when in use. The battery should be replaced before use.

　　When the signal generator is not in use, it should be placed in a dry and ventilated place to prevent moisture.

AfterSalesService :

• Signal generator manufacturer