Personal Security Wire Manufacturer, Personal Security Wire Grounding Wire, Power Personal Security Wire Distribution Room Electrician

Description :

　　The above prices are customized size prices. Please consult the merchant for specific size product prices!!!

　　The above prices are customized size prices. Please consult the merchant for specific size product prices!!!

　　The above prices are customized size prices. Please consult the merchant for specific size product prices!!!

　　Notes:

　　Before using the personal security line, it should be confirmed that the power has been cut off beforehand and that there is no voltage on the equipment before proceeding. First, connect the grounding wire clamp to the grounding grid or flat iron piece, and then use a grounding rod to tighten the wire end wires to the equipment wires. When removing the short-circuit grounding wire, the sequence is exactly the opposite of the above. The distance between the short-circuit grounding wire installed and the live equipment, taking into account the influence of the grounding wire swing, should not be less than the new value specified in the "Electricity Safety Work Regulations". It is strictly prohibited to use winding methods for grounding short circuits without using wire clamps. Portable short-circuit grounding wires should be properly stored. Before each use, carefully check if it is intact, if the soft copper wire is not exposed, and if the nut is not loose, otherwise it cannot be used. The inspection cycle for portable short-circuit grounding wires is once every five years, and the inspection items are the same as the factory inspection. After passing the test, the portable short-circuit grounding wire should be judged based on the magnitude of the short-circuit current and appearance inspection after being subjected to a short circuit, and generally should be scrapped.

AfterSalesService :

• Electric personal security line